Sanding and Finishing
For optimal sanding of veneer products consistently, sanders should be configured with:1. Conveyor with variable feed speed. The ability to adjust feed speed is critical to maintaining consistency when veneer sanding. Controlling the “dwell” time under the sanding platen directly affects the amount of material removed. Single and two-speed drive motors do not have enough adjustment to dial in the correct “dwell” time for each wood species or veneer type. speed of the conveyor should be between 9-12 mpm depending on the veneer type.
By
Mike Johnson ,
February 13, 2024 | 1:23 pm CST