Makor Model Multilevel 7000/6 oven allows the flash-off of water-based or solvent-based coating materials.

The Makor Evolution Twin spray machine is designed to apply coating at both high speed and with high quality.

The Makor Q-One 1300 with changeover system is intended for companies with low volume production applying water-based or solvent-based paints, or glues.

Heeseman's HSM.2 DBS2 is a 53” wide two-head planetary brush sander offering flexible brush sanding for medium to large shops. This sander can finish sand, edge break, and sealer sand both flat and three-dimensial parts. In addition, the planetary style DBS head can also be used for texturing. The machine has two independently controlled brush-sanding heads that are activated by the touch screen machine controller.

Heeseman's MFA Impression CLLef DBS 53” wide four-head sander offers a flexible sanding platform for medium to large shops. This sander can finish sand solid wood/veneer, edge break, solid surface, sealer sand and high gloss polish sand. In addition, the planetary style DBS head can also texture, randomize solid surface scratches and sealer sand three-dimensional workpieces. It has four independently controlled sanding heads that are activated by the touch screen machine controller. The chevron segmented pad on the third head provides the best sanded surfaces.

The Heeseman MFA Impression RLLef DBS 53” wide four-head sander is designed to offer a flexible sanding platform for medium to large shops. It can calibrate, finish sand solid wood/veneer, edge break and sealer sand. In addition, the planetary style DBS head can also texture, randomize solid surface scratches and sealer sand three-dimensional workpieces such as five-piece doors. It has four independently controlled sanding heads activated by the touch screen machine controller. The chevron segmented pad on the third head provides the best sanded surfaces.

Homag's Sandteq W-300 (335 RRH) is a 53” wide three-head constant passline sander that provides a flexible one-pass-and-done solution for medium to large shops. This sander is designed to calibrate, finish sand solid wood/veneer and sealer sand. The machine has three independently controlled sanding heads that are activated by the touch screen machine controller. The chevron segmented pad on the last head is designed to provide the best sanded surfaces.

Homag's Sandteq W-200 (225 RC) 53-inch wide constant passline two head sander is designed to provide flexibility for a small to medium shop. This sander can calibrate, finish sand solid wood/veneer and sealer sand. The machine has two independently controlled sanding heads that are activated by the touch screen machine controller.

Homag's Sandteq W-100 (124RC) widebelt sander is designed to be a small footprint sander with a big impact for a smaller shop. It can calibrate, finish sand solid wood and veneer. It has two independently controlled sanding heads that are activated by the touch screen machine controller.

Dubois Equipment’s new MS-12 moulding sanders are engineered and designed with small- to medium-sized cabinet and furniture plants in mind. Available in 4- to 7-head configurations, the sanding/denibbing machine is capable of handling mouldings as short as 17 inches, and from 1/2 to 11inches wide. The MS-12 moulding sander requires minimal set-up time when changing from one profile to another due to the flexible strip abrasives design, Dubois says. With an optional set of sealer sanding loadings, the machine can change from a white wood sander into a sealer sander in just a few minutes.