HOLD DOWN TABLE APPLICATION
Our Flagship "Hold Down Vacuum" systems are Dynaseal and more recently EVO2.
The 25 or 40 HP Dynaseals, most commonly used in wood "hold down" applications and EVO2 systems utilize the highly efficient TRVX pump series.
The benefit to the end user is that pumps consume 23% less energy than most all similar horsepower rated pumps. This additional KWh of power consumed will quickly pass any savings made from buying lower cost, less efficient systems.
Sometimes, understandably, a CNC machine supplier will opt for lower cost Vacuum systems to keep overall investment in their product lower. They however, its not their focus on the running costs of the choice, so if your company is in the market for CNC, please be sure to ask for running costs of the system you may be getting. The vacuum system will normally consume much more power than the CNC machine.
More Cubic feet of airflow per KW consumed means years of savings over less expensive pumps. Another benefit is Travaini well documented reliability, as we have a huge installed base of systems 10 to 20 years old. Despite that fact, all service parts remain standard.
Our available SPM (System Performance Monitoring) ready control panel with VFD will not only save more energy and prolong pump life, it enables "Predictive Maintenance" systems many companies are using, to link to the vacuum system to monitor the key performance indicators.
We also will continue to offer the traditional control panel for those not requiring these features.
EVO2 with a compact footprint, packs a 40 HP punch of the foot of much lower power systems that are larger. The ingenious oil separation system has minimized possibility of "carry over mist" that occurs when gaps appear on the table after component machining. NOTE: There will always be a slight oil mist in Liquid ring or oil lubricated vane pumps. By nature of the process it is impossible to have zero.
CENTRAL VACUUM SYSTEMS
We are expert in helping our customers save even more operation cost when multiple tables are in use. The use of a centralized vacuum can save up to 45% of energy cost over and above the savings of the TRVX pumps.
A common misconception with central vacuum is that if the system fails all the CNC tables are unable to operate. Please contact us to learn how we have solved that potential issue!
Make more space in your shop, reduce power costs and reduce general noise levels with central vacuum.
The Travaini representative will assist in the power audit required. Call or e mail us today.