The following contains information on companies beginning with the letters T through Z who are WCMA members.

Click here for WCMA companies A through J

Click here for WCMA companies K through S

Click here for WCMA Technology Partners

Talbott Lumber Co.
Belington, W V 26250
Tel: 304-823-2200
[email protected]
Contact: Brian Talbott
Products: Cabinet parts, drawer fronts & sides, casket parts, chair parts, blanks, dowels, edge-glued panels, flooring, lineal mouldings, mouldings, musical instrument parts, pins/plugs/knobs, squares, table parts, toy parts, upholstered frame stock, lumber
Species: Basswood, beech, birch, cherry, mahogany, hard & soft maple, red & white oak, poplar, walnut
Machining: Assembly, boring, routing, face & edge sanding, shaping

Texas Doors
Dallas, TX 75237
Tel: 214-333-9300
www.texasdoors.com
Contact: Jeff Elseman
Products: Cabinet doors, MDF doors
Species: Alder, ash, beech, birch, cherry, hickory, mahogany, hard & soft maple, red & white oak, pecan, ponderosa pine, walnut, cypress, cedar, MDF
Machining: Mortising, face sanding, tenoning

Thompson Maple Products Inc.
Corry, PA 16407
Tel: 814-664-7717
www.tmpusa.com
Contact: Chuck Henness, Dolly Sperry, Chuck Thompson
Products: Dowels 7/8” - 3”-, large turning blanks 2-3/4” - 4” diameter, tool handle blanks, musical instrument parts, baseball bat billets, cabinet parts, chair parts, stair parts, flooring, custom specialty blanks
Species: Hard & soft maple, white ash, American beech
Machining: Dowelling, moulding, S4S, E4E, dowel sanding

Thos. Moser Cabinetmakers
Auburn, ME 04211
Tel: 207-753-9834
www.thosmoser.com
Contact: Tim McIntyre
Products: Solid dimension
Species: Black cherry, American black walnut, hard maple
Machining: Cross cutting, ripping

Tilo Industries
Lewisburg, PA 17837
Tel: 570-524-9990
www.tiloindustries.com
Contact: Tim Yoder
Products: Cabinet parts, drawer sides, stiles & rails, casket parts, chair parts, blanks, dowels, edge-glued panels, millwork, lineal mouldings, mouldings, rounds, solid & laminated squares, extra large laminated squares, hand rails, table tops
Species: Alder, ash, basswood, birch, butternut, cherry, elm, Douglas fir, hickory, hard & soft maple, red & white oak, white pine, poplar, walnut, teak

Timber Wolf Forest Products
Hudson, NC 28638
Tel: 828-728-7500
www.timberwolfforest.com
Contact: Rita Roper
Products: Chair parts, blanks, S2S, S4S, E4E, dowels, edge-glued panels, bent plywood, squares, table bases, turnings, stair balusters, newel posts, cabinet components, carvings, furniture components, custom legs with no minimum quantity
Species: Alder, ash, birch, cherry, mahogany, hard & soft maple, red & white oak, white pine, poplar, walnut, rubberwood
Machining: Boring, carving, mortising, routing, face & edge sanding, shaping, notching, splitting

Timbercraft
New Milford, CT 06776
Tel: 800-345-4930
www.timbercraft.biz
Contact: Bill Somesla
Products: Drawer boxes
Species: Birch, soft maple

Trico Enterprises LLC
Millersburg, OH 44654
Tel: 502-239-1306
[email protected]
Contact: Al Ryan
Products: Chair parts, blanks, mouldings, rounds, squares, staircase parts, risers & spindles, hand rails, newel posts, turnings
Species: Ash, cherry, elm, hickory, hard & soft maple, red & white oak, poplar, walnut

Valendrawers Inc.
Lexington, NC 27293
Tel: 336-956-2118
www.valendrawers.com
Contact: Lisa Chrisley
Products: Drawers, drawer components, blanks, DLV doors in foil and veneer, solid wood components, component assemblies
Species: Drawers: beech, birch, plywood, PVC, wrapped particleboard; Doors: wide range of foils & veneers

Valley Custom Door
DePere, WI 54115
Tel: 920-336-3174
www.valleycustomdoor.com
Contact: Steve Mashl
Products: Cabinet doors, MDF door cores, cabinet parts, drawer fronts & sides, drawer boxes, stiles & rails, blanks, edge-glued panels, millwork, mouldings, wainscoting, wall paneling
Species: Alder, ash, aspen, basswood, beech, birch, butternut, cherry, hickory, mahogany, hard & soft maple, birdseye maple, red & white oak, quarter oak, rift oak, pecan, white pine, poplar, walnut, willow, cedar, Lyptus
Machining: Assembly, CNC machining, finishing, routing, face & edge sanding, shaping, tenoning

Wagner Millwork Inc.
Owego, NY 13827
Tel: 607-687-5362
[email protected]
Contact: Steve Schaeffer
Products: Width selected Kiln dried lumber: 4/4, 5/4, 6/4, 8/4, blanks, S2S blanks
Species: Hard & soft maple, red & white oak, ash, basswood, cherry, hickory

Walnut Creek Planing
Millersburg, OH 44654
Tel: 330-893-3244
[email protected]
Contact: Charles Kratzer
Products: Chair seats & parts, S2S, S4S, E4E blanks, fingerjointed products, butcher block panels, rounds, squares, stair treads, risers, hand rails, newel posts
Species: Ash, beech, hard & soft maple, red & white oak, poplar
Machining: Fingerjointing, tenoning, moulding, gluing, sanding

WalzCraft Industries
La Crosse, WI 54502
Tel: 608-781-6355
www.walzcraft.com
Contact: Customer Support Team
Products: Custom cabinet doors, drawer fronts, dovetail drawer boxes, cabinet components, millwork
Species: Red & white oak, quarter sawn red & white oak, rift sawn red & white oak, maple, cherry, birch, red birch, hickory, pine, walnut, ash, alder, beech, butternut, elm, Douglas fir, poplar, afrormosia, Lyptus, mahogany, sapele

Weyerhaeuser Hardwoods & Industrial Products
Portland, OR 97223
Tel: 253-924-3223
www.weyerhaeuser.com
Contact: Jose Padilla
Products: Cabinet doors & parts, chair parts, blanks, flooring, lumber, mouldings, plywood & veneered parts, stair parts, table parts, musical instrument parts, upholstered frame stock
Species: Alder, ash, basswood, beech, birch, cherry, hickory, hard & soft maple, red & white oak, white & yellow pine, ponderosa pine, poplar, walnut, MDF
Machining: CNC boring, CNC machining, CNC routing

Wheeland Lumber Co. Inc.
Liberty, PA 16930
www.wheelandlumber.com
Contact: Derek Wheeland
Products: Drawer sides, stiles & rails, blanks, edge-glued panels, parquet flooring, strip flooring, millwork, mouldings, wainscoting, wall paneling, rounds, solid squares, lumber
Species: Ash, aspen, beech, birch, cherry, hickory, hard & soft maple, red & white oak, yellow pine, poplar, Tupelo, walnut
Machining: Face sanding, tenoning

White County Moulding
Cleveland, GA 30528
Tel: 706-865-3166
www.hardwoodweb.com
[email protected]
Contact: Hal Mitchell
Products: S4S, architectural mouldings, finger jointed blanks & mouldings, handrail, dimension stock, plank flooring, paneling, shutter components
Species: Red & white oak, poplar, hard & soft maple, cherry, ash, walnut, beech, alder, Brazilian cherry, Spanish cedar, sipo, cypress, hickory
Machining: Planing, gang ripping, straight line ripping, defecting, finger jointing, face & edge gluing, moulding, end matching

White River Hardwoods-Woodworks
Fayetteville, AR 72701
Tel: 479-442-6986
www.whiteriverinc.com
Contact: Dee Smallwood
Products: Bendings, casket parts, mouldings, MonReale, embossed & hand carved decorative mouldings, fireplace mantels/surrounds, MDF mouldings, turnings, lumber
Species: Alder, ash, birch, cherry, mahogany, hard & soft maple, red oak, poplar, walnut, MDF, others on request

Wible Lumber Inc.
South Milford, IN 46786
Tel: 260-351-2441
www.wiblelumber.com
Contact: David Wible
Products: Drawer fronts & sides, stiles & rails, blanks, edge-glued panels, butcher block, strip flooring, mouldings, wainscoting, table tops, lumber
Species: Alder, ash, aspen, basswood, beech, cherry, hickory, hard & soft maple, red & white oak, poplar, walnut
Machining: Face sanding, tenoning, moulding, chopping, gluing.

Wilson Hardwoods Inc.
Titusville, PA 16354
Tel: 814-827-0277 218-751-3038
[email protected]
Contact: Brian Hughes
Products: Blanks, lumber
Species: Cherry, hickory, hard & soft maple, red & white oak, poplar

Wolf River Lumber Inc.
New London, WI 54961
Tel: 920-982-2542
www.wolfriverlumber.com
Contact: Kari Bunting
Products: Cut-to-size blanks, lumber to 16/4, lineal mouldings
Species: Alder, ash, aspen, basswood, beech, birch, cherry, cottonwood, hickory, hard & soft maple, red & white oak, pine

Wood Specialty Co. Inc.
Philadelphia, PA 19129
Tel: 215-483-5100
www.woodspecialty.com
Contact: Steve Slaski
Products: Hardwood edge-glued panels, laminated squares, sports items, dartboards
Species: Basswood, cherry, red oak, yellow poplar, hard & soft maple, others on request
Machining: Gluing, planing-finish, precision end trimming, resawing, sanding, ripping to width, CNC shaping

Woodcraft Industries Inc.
St. Cloud, MN 56304
Tel: 320-252-1503
www.woodcraftind.com
Contact: Steve Leabch
Products: Wood components, cabinet doors, veneer raised panels, rigid thermal foil doors, veneer wrapped mouldings, cabinet mouldings
Species: Red & white oak, quarter sawn oak, cherry, hickory, hard & soft maple, alder, eucalyptus
Machining: Moulding, tenoning, routing, boring, sanding, coping

Woodcraft Inc.
Morristown, TN 37816
Tel: 423-581-5413
woodcraft @bellsouth.net
Contact: Tim Elliott
Products: Laminated squares, edge-glued panels, moulder blanks, mouldings, stair treads
Species: Ash, cherry, hard & soft maple, poplar, red & white oak, white pine, African mahogany
Machining: Moulding, tenoning, gluing

Woodline Manufacturing
Eveleth, MN 55734
Tel: 812-471-1594
www.woodlinemfg.com
[email protected]
Contact: Ernie Smith
Products: Cabinet doors, cabinet parts, face frames, edge-glued panels, drawer fronts, mould-to-pattern mouldings, millwork, bed frames, moulder blanks
Species: Hard & soft maple, red oak, character hickory, cherry, birch, alder
Machining: Moulding, gluing, CNC routing, shaping, sanding, tenoning, mortising, end trimming, pocket screw assemblies

Woodmatic Industries
Ada, MI 49301
Tel: 616-682-5104;
[email protected]
Contact: Michael Boll, 616-889-5084
Products: Cabinet doors, MDF doors, cabinet parts, drawer fronts & sides, drawer boxes, stiles & rails, casket parts, blanks, edge-glued panels, millwork, lineal mouldings, fireplace mantels/surrounds, wainscoting, wall paneling, mouldings, MDF mouldings, particleboard parts, veneered parts, solid & laminates squares, staircase parts, stair treads, hand rails, tabletops, edgebanding
Species: All species
Machining: Assembly, CNC Machining, finishing, routing, CNC routing, face & edge sanding

Yoder Lumber Co. Inc.
Millersburg, OH 44654
Tel: 330-893-3121
www.yoderlumber.com
Contact: Paul Dow
Products: Moulder blanks, edge-glued panels, squares, balusters, machined & semi-machined components, moulded parts, newel posts
Species: Red oak, poplar, beech, cherry
Machining: Sanding, moulding, routing, CNC routing, gluing, surfacing

Young Manufacturing Co.
Beaver Dam, KY 42320
Tel: 270-274-3306
www.youngmanufacturing.com
Contact: Sarah Hamlin
Products: Stair treads, risers & related components, exterior wood & clad frames, exterior door sills
Species: Red & white oak, poplar, hard maple

Young’s Furniture Mfg. Co.
Whitesburg, TN 37891
Tel: 423-235-6548
www.youngs-furniture.com
Contact: Derry Young
Products: Finished exposed parts for upholstery, cabinet components, furniture components, building product components, laminated squares, edge-glued panels, rough blanks, mouldings, dimension stock
Species: Yellow poplar, red & white oak, white pine, hard & soft maple, white ash, rubberwood, tupelo
Machining: Moulding, CNC routing, shaping, tenoning, boring, carving, sanding, laminating, gluing, turning, finishing/staining

Zamma Corporation
Orange, VA 22960
Tel: 540-672-5200
www.zamma.com
Contact: Peter Spielman
Products: Profile wrapped furniture components, veneer, PVC thermo foils, furniture foils
Species: Various
Machining: Moulding and profile wrapping, cut-to-size

Zelazoski Wood Products
Antigo, WI 54409
Tel: 800-240-0974
www.zwpi.com
Contact: Ben Zelazoski
Products: Lineal mouldings, musical instrument parts, toy parts, turnings
Species: Alder, ash, aspen, basswood, beech, birch, butternut, cherry, hard & soft maple, red oak, poplar, walnut
Machining: Assembly, boring, CNC boring, CNC machining, finishing, routing, CNC routing, face & edge sanding, shaping, tenoning