Bogota, NJ — Outwater has redefined the standard for architectural moulding and millwork by now offering economically priced 100% recycled “Green” Cornice and Crown Mouldings that have been specifically designed for use with indirect lighting. Manufactured to easily accept a variety of cove moulding light fixtures (pictured with Outwater’s New LED Ribbon-Flex Lighting) without causing scalloped or uneven light dispersion and illumination, Outwater’s 100% recycled “Green” Cornice and Crown Mouldings for indirect lighting can also be used just as readily as a traditional cornice or crown moulding without lighting if desired.

Outwater’s new, low cost, energy efficient 24-volt LED Ribbon-Flex Lighting is the most versatile and thinnest light on the market today! With no fixture to hide, Outwater’s LED Ribbon-Flex Lighting can be mounted virtually anywhere! Easy to install, via incorporated peel & stick tape, Outwater’s LED Ribbon-Flex Lighting offers comparable illumination to a 20-watt halogen bulb with an approximate 50,000 hour bulb life, and is perfectly suited for any type of installation that warrants an almost nonexistent profile.

OUTWATER PLASTICS INDUSTRIES + ARCHITECTURAL PRODUCTS BY

OUTWATER, with sales and distribution facilities in New Jersey and Arizona, have served their customers since 1972 as "the source" for in stock, ready-to-ship standard and innovative component products.

Additional Product Information for Outwater’s 100% Recycled Cornice and Crown Mouldings for Indirect Lighting:

For years, architectural moulding manufacturers have been touting the inherent commonplace benefits of using high density polyurethane mouldings in comparison to mouldings manufactured of media that had been previously offered.

Every now and then a new product comes along that revolutionizes and redefines a new standard that brings about positive changes within industry; appreciable changes such as the ability to go “Green” without having to spend a lot of “Green.” That product is Outwater’s new line of 100% recycled “Green” Cornice and Crown Mouldings, which offers all of the benefits of previous generations of polymer mouldings and more. Responsibly manufactured from select, reclaimed, renewable polystyrene resources, Outwater’s 100% recycled “Green” Cornice and Crown Mouldings have elevated this long venerated decorative building product to a whole new level, a level that you and your customers can and will immediately appreciate.

Outwater’s 100% recycled “Green” Cornice and Crown Mouldings are the cost effective alternative to more costly polymer mouldings and millwork without compromise.

Comprising a full, decorative array of cornice mouldings and panel mouldings, Outwater’s 100% recycled “Green” Mouldings offer a new economical decorative and design medium that up until now, was never previously available.

The unique recycled polystyrene compound from which Outwater’s 100% recycled “Green” Cornice and Crown Mouldings are manufactured, not only provides a hard, strong surface, it is extremely lightweight, enabling Outwater’s 100% recycled “Green” Cornice and Crown Mouldings to be easily installed using the same time-honored, traditional woodworking techniques and tools that are employed in the installation of wood and mdf mouldings. Outwater’s 100% recycled “Green” Cornice and Crown Mouldings can be cut, nailed, glued and painted just like wood and mdf mouldings.

Outwater’s premium polystyrene compound itself, is an environmentally friendly, ecologically sensible “Green” compound that can be recycled and is CFC free. Additionally, the factory applied finish for Outwater’s 100% recycled “Green” Cornice and Crown Mouldings is water based without the use of any solvents, making its selection for use easy and wise.

With many decades devoted to the production of high density polyurethane mouldings, Outwater has applied its acquired knowledge and unsurpassed experience in the design and manufacture of polymer mouldings and millwork in researching and pioneering the development of its 100% recycled “Green” Cornice and Crown Mouldings.

Additional Product Information for Outwater’s New LED Ribbon-Flex Lighting:

Outwater’s new, low cost, energy efficient 24-volt LED Ribbon-Flex Lighting (also offered as RGB Ribbon-Flex Lighting) is the most versatile and thinnest light on the market today! With no fixture to hide, Outwater’s LED Ribbon-Flex Lighting can be mounted virtually anywhere! Easy to install, via incorporated peel & stick tape on its underside, Outwater’s LED Ribbon-Flex Lighting is perfectly suited for cove or cornice accents, showcases, toe kicks, wall units, in or under cabinets, or any type of installation that warrants an almost nonexistent profile.

Outwater's low cost, energy efficient 24-volt LED Ribbon-Flex Lighting is similar in illumination to a 20 watt halogen bulb, yet consumes only 4.8 watts per 22-1/2-inch field trimmable strip with an approximate 50,000 hour bulb life.

Outwater's LED Ribbon-Flex Lighting not only saves you hundreds of dollars in electricity usage costs compared to the equivalent output of a 20 watt halogen bulb, but also on the cost of the multiple replacement halogen bulbs you would have to purchase to equal the lifespan of a single LED Ribbon-Flex Lighting’s multiple LED’s! Furthermore, no heat emissions or generated UV radiation render Outwater’s LED Ribbon-Flex Lighting ideal and safe for a variety of residential and commercial applications.

Comprising 22 high powered cool white LED’s spaced 1-inch on center affixed to an ultra low profile 3/8-inch wide flexible backing, the LED Ribbon-Flex Lighting’s diminutive physical profile not only enables it to practically vanish within the décor of any environment, up to 21-Feet can be connected to one power supply in either dry or damp environments via supplied solder free, end-to-end (male/female) plug-in capability for continuous lighting.

SOURCE: Outwater Plastics Industries Inc.

Have something to say? Share your thoughts with us in the comments below.