Low Profile Lift Table

The LiftMat lift table from Southworth Products descends to just 3 ¼ inches above the floor and accommodates any skid or pallet, including closed-bottom designs. It has a capacity of 2,200 pounds and a raised height of 31 ½ inches.  When the unit is equipped with an optional diamond-plate ramp, workers can feed and offload it with a hand pallet truck or rolling cart. Users can access loads from all four sides with no bending and minimal reach-over, reducing worker fatigue and injuries, says Southworth Products.  The platform can be raised or lowered with a powered foot switch, a hand-held push-button remote, or a wall-mounted switch.  An auto-stop safety toe guard instantly stops descent when it comes in contact with any obstruction.  The unit does not require a pit and can be relocated as needed.  Applications include loading and unloading unpalleted boxes with a two-wheel hand truck or dolly,  machine feeding, raising malfunctioning equipment to a comfortable level for repair work, assembly work positioning, and transferring loads between levels. The LiftMat is available with 15 platform sizes, ranging in 6-inch increments of width and/or height from 24 x 60 inches to 48 x 72 inches.   

(800) 743-1000                   SouthworthProducts.com




About Southworth Products Corp.



Email: [email protected]

Phone: 800-743-1000

Fax: 207-797-4734

Product Categories:


to our redesigned homepage!

Scroll Down for more stories