Martin Goebel Has Big Plans
July 14, 2013 | 5:45 pm CDT
Click on the image to open
Click on the image to open
Martin Goebel of Goebel Furniture & Co. with the big black oak log milled by Wunder Woods.
Click on the image to open
Even with the mill jacked up and elevated as high as it would go, the log needed to be trimmed for the mill to work.
Click on the image to open
After we got a level work surface, it was easier to work on top of the log.
Click on the image to open
This is a manual mill and needs to be pushed through the cut. To speed things up, I helped Dan push the mill.
Click on the image to open
This is the natural-edge slab Martin picked out for the tabletop. It is just over 10′ long and 5′ wide on the end with the trimmed sides. It was cut 4″ thick and will take over a year to dry, even with the help of a kiln. There are a couple of spots that Martin sealed up to help prevent large cracks. Overall, an impressive piece of wood

About two weeks ago we milled a big black oak log for our friend Martin Goebel of Goebel & Co. Furniture. It looks like he has some big plans, and they include a large tabletop for a customer.

Our mission was to get at least one good slab, cut at 4″ thick, that would stay together through the drying process. The log was stout with a lot of character and a few bad spots, but it was so big that getting some slabs that met the requirement was no problem.

This is the first log that I have milled on the Lucas Mill that required the mill to be jacked up (by about 10″) to get started. The mill will cut up to 62″ wide with the chainsaw slabber attachment, and we still had to trim both sides of the butt end for the log to fit. We milled the bottom log with the slabber, and Roger Branson of Red Rooster Sawmill cut up the top logs on his Wood-Mizer LT40.

In all we got about 1,600 board feet out of the tree, with about 1,000 board feet coming out of the bottom 10′ log.

After the milling we got all of the wood back in the shop and stacked to start drying. It is nutty to know that the lumber is so big that it takes two of us just to slide one end of the slab on to the sticks. Luckily, the stacking is done, and now we wait, with our fingers crossed, in hopes that nothing breaks as it dries.

Guest Blogs Welcome
Got a viewpoint you would like to share with our online woodworking community? Woodworking Network welcomes guest blogs from wood products professionals. Submit your musing, comments and opinions to Rich Christianson, Editor at Large, at [email protected].

Have something to say? Share your thoughts with us in the comments below.