Federal Brace has released a new style of corbel outfitted with a premium corbel support system. Available in the Transitional Mission, Scroll Mission (pictured), Mission Signature, and Geneva styles, stainless steel adornments give each piece a decorative emphasis, and the weight-bearing Corbel Rib System provides a carrying capacity of 375 pounds per support. Fasteners and sealant needed for installation are included with purchase, and the unfinished maple can be painted or stained for customization.

Festool has introduced a new sanding technology with the Multi-Jetstream 2 pads and abrasives, which incorporates an optimized interaction between intake and exhaust air. The company says this design provides close to 100 percent dust extraction, increased longevity of abrasives, and dust removal extended out to the very edge of the pad and abrasive. The Multi-Jetstream 2 features a patented channel structure with active dust transport, and a high-temperature-resistant fastener.

Festool has introduced a new sanding technology with the Multi-Jetstream 2 pads and abrasives, which incorporates an optimized interaction between intake and exhaust air. The company says this design provides close to 100 percent dust extraction, increased longevity of abrasives, and dust removal extended out to the very edge of the pad and abrasive. The Multi-Jetstream 2 features a patented channel structure with active dust transport, and a high-temperature-resistant fastener.

Rockler has updated its router table box joint jig which features a larger, designed backer sled made from reinforced nylon and with dedicated spots for clamping the workpiece. The sled now incorporates the indexing key for positioning the workpiece during each cut, and the jig comes with three interchangeable brass indexing keys for 1/4, 3/8, and 1/2 inch box joints. It features upgraded easy-to-grip five-star knobs and comes with a replaceable MDF sacrificial fence for mounting to the backer sled. Priced at $79.99, the jig has an MDF base with a smooth melamine surface and precision-machined slots that keep the sled from traveling too far into the bit.

Rockler has updated its router table box joint jig which features a larger, designed backer sled made from reinforced nylon and with dedicated spots for clamping the workpiece. The sled now incorporates the indexing key for positioning the workpiece during each cut, and the jig comes with three interchangeable brass indexing keys for 1/4, 3/8, and 1/2 inch box joints. It features upgraded easy-to-grip five-star knobs and comes with a replaceable MDF sacrificial fence for mounting to the backer sled. Priced at $79.99, the jig has an MDF base with a smooth melamine surface and precision-machined slots that keep the sled from traveling too far into the bit.

The Magari Group has introduced Abetone, the 36th door style to its product matrix. Abetone is distinguished by a raised white panel painted door, and includes a plywood box, soft close doors, and glides for the drawer.

The Magari Group has introduced Abetone, the 36th door style to its product matrix. Abetone is distinguished by a raised white panel painted door, and includes a plywood box, soft close doors, and glides for the drawer.

Precision Drive Systems' (PDS) new patent-pending precision digital stroke gauge technology for HSK measurements works in any position and has a stable base that provides reliable, repeatable measurements without looking at the spindle nose. This gauge retails at $299 and can be purchased at the PDS online store.

Precision Drive Systems' (PDS) new patent-pending precision digital stroke gauge technology for HSK measurements works in any position and has a stable base that provides reliable, repeatable measurements without looking at the spindle nose. This gauge retails at $299 and can be purchased at the PDS online store.

Powered by an HSD FS915 5hp spindle, ShopBot’s Automatic Tool Changer (ATC) is available on the company's full size PRSalpha Gantry CNC tools. An ATC automatically changes cutters between tool paths and eliminates the need for the CNC operator to change and zero tools individually. The company says a machine equipped with an ATC can perform operations normally done on other pieces of equipment, eliminating the need for additional machines in the shop.