The Felder sliding table panel saw K 945 S is available with the Preventative Contact System, which is a non-contact triggering safety device. The massive saw aggregate has a 155mm cutting height. Felder says its system solutions, such as the “X-Roll” sliding table and the tilting segment guide “Easy-Glide,” ensure reliability. Other features include a cutting length of 2050–3700mm; rip capacity of 800–1500mm; and the "Power Drive" Control (option).

The CM-43 CNC auto multiple rails machining center from Castaly Industries Corp. designed for maximum efficiency. This cutting-edge machine features Automatic 3 rails x 2 Zone operation, enabling simultaneous drilling, milling, and slots cycle. With its advanced technology and precision, it guarantees unparalleled productivity and accuracy in the manufacturing process, the company says.

The SL 3700 sliding table saw from Ironwood Woodworking Machinery, a division of Stiles Machinery, features chrome-hardened guide rails to ensure the sliding carriage passes straight without lateral movement.  It features a 7.5 hp, three-speed main blade, and is accompanied by a scoring blade that is automatically adjusted via a controller. The all cast-iron, 2,500 lbs unit has a 10-1/2 foot carriage that is capable of cutting pretty much any size panel, Stiles adds.

The smart concept behind the Homag DrillTeq V-310 vertical machining center offers maximum functionality within a limited footprint. The VMC, covering just 118 square feet, has greater drilling, routing, and grooving capabilities than other machines in its design class, the company says. The V-310 can also handle tasks like hinge and lock door preparation, processing connectors used in cabinet and furniture construction, and dowel insertion.

The Fimal Concept 350 PLUS Saw offers the advantages of a beam saw along with versatility of a panel saw, the company says. The basic structure is numerically controlled with only one position to ensure the planarity, squareness of all the measures. The Concept 350 is equipped with a reading system of the panel able to determine the width automatically placing the blade in proximity of the end of the panel itself, avoiding the wait for empty runs with consequent saving of time.

The Power-Pin drill and dowel machine by Holz-Her pairs perfectly with nesting operations. Its horizontal drilling component, optional vertical drilling component, and dowel insertion unit eliminate manual dowel insertion and grant time and cost savings. The Power-Pin can drive pre-coated and standard wooden dowels measuring 30, 35 and 40mm long, and is suitable for work pieces at lengths of 60mm up to 2,600mm.

The MB100 SlabMizer slab flattening mill from Wood-Mizer flattens material up to 36” wide and 8” thick in less time using a 3HP electric 5" cutting head equipped with five 4-sided carbide knives. For wider material, Wood-Mizer offers the MB200 SlabMizer capable of processing material up to 56” or 72” wide. To flatten material, the cutter head is moved side-to-side with a handle and secured with pre-set notches.

SNX nVision C1.5 series contour (curved) edgebanders. The C1.5 was specifically designed for open-ended and tight inside radii parts. The unit has a new  PLC interface, It is capable of edgebanding and trimming a 7/16” inside radius. It featues 20,000 rpm ER20 collet-type spindles (top/bottom), an articulating vacuum support arm. It bands and trims open-ended parts up to 8’, can apply .5mm – 3mm thick edgebanding, and can edgeband and trim parts up to 60mm high. It uses standard EVA hotmelt glue.

The Lateral Clamp Kit  from Axiom Precision offers a low profile design capable of holding nearly any workpiece without impacting the top surface of the product. According to the company, the clamp offers immense holding power without marring the edge of your substrate. Each kit includes (2) lateral clamps, (2) serrated tips, (2) non-marring EVA tips, (2) dual-height extruded fences and hex driver.

The feedthrough Ares CNC machine center from Castaly Machine is suited for 3-D wood processing, cupboard doors, wooden doors, window processing, video game cabinets, door lite cutting, and steel door processing. The machine features horizontal and vertical spindles for top and side stock processing. It is designed ready for 3-D cutting usage and superior performance. It has a moving gantry construction for space-saving, the company says.