See PS Locks’ versatile products at WMS
PS Lock Solo Electronic Lock

The Solo electronic lock, is one of a variety of products that PS Lock will exhibit at WMS.

MISSISSAUGA, Ontario – PS Locks, an Austrian manufacturer of electronic furniture locks, will present its range of products at the Woodworking Machinery & Supply Conference & Expo, Feb. 24-26, at the International Centre.

The company inventories and ships products throughout North America from its warehouse and customer support center in Virginia. PS Locks’ extensive product line includes RFID and Bluetooth locks for all types of drawers and cabinet doors including glass, wood, metal, sliding, and double sliding. The locks can be battery powered (up to 30,000 openings on one battery) or plugged into any outlet.
 

Flin, with a height of 11mm, has enough space in almost every side wall. All versions are equipped with a 1.5m long cable; optional cable lengths are available by request.

PS Locks’ offerings include:

  • The Solo electronic lock is used on doors, drawers, and sliding doors and fastened to the respective door or panel on the inside. Not visible from the outside, the Solo lock is operated with key cards, key rings, bracelets or mobile phones.
  • The Quad furniture lock is sturdy due to its low height and the internal gear. The electronics are contained in a separate housing which can be attached to the top, side or front of the furniture. The electronics are connected by a cable and powered by two AAA batteries.
  • The Gym lock can easily be used in place of coin deposit locks and mechanical locks on cabinets and lockers since the dimensions are identical to the common coin deposit locks. The carbon-reinforced white bar immediately indicates to the customer if a locker was mistakenly occupied on the opened furniture door. Gym locks are delivered as standard with a “free choice of locker,” allowing visitors to use an unoccupied locker with a key. It`s also possible to activate an automatic opening after an occupation of 12 hours. The programming card serves as a master card and can open occupied lockers at any time. 
  • The Beetle is an electromechanical furniture lock, which is connected either to a Solo lock or directly to external voltage. The small, robust design allows a variety of applications from showcases through drawers to caravans or boats. All versions are equipped with a 1.5m cable. The length and possible plugs can be adjusted on request. 
  • Flin, with a height of 11mm, has enough space in almost every side wall. The Flin is drilled or milled with two holes, each 35mm in diameter. The flat cable with 3M tape enables easy installation. All versions are equipped with a 1.5m long cable. The length and possible plugs can be adjusted on request. For large quantities, there is also the option of customizing the color. 
  • The One electronic furniture lock is suitable to be used to lock two doors, including for a sliding cabinet door with high tolerances. The ratchet is mounted on the inner sliding-door and the lock can easily be attached.
  • The Two is an electronic furniture lock which is installed in between two sliding doors. For wooden doors this is bolted and is not visible from the outside. For glass doors, the lock is glued with 3M adhesive film and the closing part with UV adhesive glue. Due to the crack protection in the closing part, the lock cannot be opened by pulling on the door.

Learn more about PS Locks at WMS booth #740 or by visiting pslocks.com.
 

PS Lock Quad
The Quad furniture lock is sturdy due to its low height and the internal gear.

About the Wood Machinery & Supply Conference & Expo (WMS)
WMS is world-renowned as Canada’s preeminent industrial woodworking event. For more than four decades, WMS has connected Canada’s woodworking professionals with the world’s most prominent machinery manufacturers and suppliers. WMS 2019 attracted attendees from nine Canadian provinces and two territories.

WMS Reg Button

The 2019 edition featured 75,000 square feet of exhibit space and more than 175 exhibitors.  According to show management, a new floorplan will be available soon.

For information about exhibiting and sponsorship opportunities, contact Rich Widick, [email protected]; 630-929-7918.

View the interactive prospectus.

More upcoming Woodworking Network events
Closets Conference & Expo co-located with Wood Pro Expo California, April 27-29, 2022, San Diego Convention Center, San Diego, Calif.

Executive Briefing Conference, September 15-17, 2022, The Broadmoor, Colorado Springs, Colo.

Wood Pro Expo Lancaster, October 13-14, 2022, Spooky Nook Sports Center, Manheim, Pa.

Salon Industriel du Bois Ouvré (SIBO), October 27-29, 2022, Centrexpo Cogeco, Drummondville, Quebec.

.

Have something to say? Share your thoughts with us in the comments below.

Profile picture for user richchristianson
About the author
Rich Christianson | President/Owner/C-Level

Rich Christianson is the owner of Richson Media LLC, a Chicago-based communications firm focused on the industrial woodworking sector. Rich is the former long-time editorial director and associate publisher of Woodworking Network. During his nearly 35-year career, Rich has toured more than 250 woodworking operations throughout North America, Europe and Asia and has written extensively on woodworking technology, design and supply trends. He has also directed and promoted dozens of woodworking trade shows, conferences and seminars including the Cabinets & Closets Conference & Expo and the Woodworking Machinery & Supply Conference & Expo, Canada’s largest woodworking show.