Rockler Woodworking and Hardware’s Router Table Spline Jig attaches to a router table to create decorative splines for mitered box and frame joints. The splines also provide extra strength in the joint. The Router Table Spline Jig consists of two main parts - the base, which attaches to the router table and the sled, which holds the workpiece at a 45 degree angle to the router bit. The sled slides in the tracks of the base to guide the spline cuts. The resulting spline cuts allow users to add their own key stock to create beautifully adorned joints, says Rockler. The Router Table Spline Jig specializes in small boxes and frames. The Router Table Spline Jig is capable of accommodating frames with a standard 11'' x 14'' opening, or boxes measuring up to 12'' x 12'' x 12''. Two adjustable fences sandwich the workpiece for extra stability during cutting. A centering tool is included, which aligns the jig with the center of the router bit and attaches to the jig for storage when not in use. The Router Table Spline Jig (59288) retails for $79.99.
(877) ROCKLER Rockler.com