DELTA Power Equipment Corp. introduces a new 12-inch Disc Sander, Model 31-140, with heavy duty cast iron construction and heavy duty steel bevel assembly supporting the table. The DELTA Disc Sander features a new design on the table tilt lock, featuring one easy-to-use dual-purpose bevel table adjustment and lock, which secures the table on both sides with just the one handle, says the company. The 17-1/4-inch x 6-1/4-inch tilting cast-iron table has left and right stops at 22.5°, 45° and 90°. The disc sander features a 12-inch diameter heavy duty steel disc with a top-mounted manual brake and a 1/2 HP, 120V motor, running at 1725 RPM with an integral dust collection fan that draws dust away from the table and into the hose. The dust hose, with 2-1/4-inch O.D. connectors, attaches to any standard shop vacuum. The disc sander also features a 3/8-inch x 3/4-inch miter gauge slot machined into the table for projects that require sanding an angle or straight edge. The cast-iron base has pre-drilled base holes and comes with a miter gauge, hose with 2-1/4-inch O.D. connectors, one 80 grit abrasive disc, and wrenches. Delta Power Equipment Corp. will be in Booth 6729 at IWF 2012.
(800) 368-1487 DeltaMachinery.com