Biography:
Bill Formella is a 25 year veteran in the 3D laminating industry with extensive involvement in every facet including machinery, materials, supplies, as well as training and technical support. Bill is the Technical Applications specialist for Smartech International and writes the Tech|Tips - 3DL blog, a free service provided by Smartech for the benefit of the entire 3D Lamination industry. Bill is also the owner and moderator of the LinkedIn group Membrane Pressing & 3D Laminating Design. Follow him via twitter @formellacsi and @smartechint.
Gluing, Laminating & Veneering
Troubleshooting tips for 3D laminating
Pressroom temperature and more best practices for quality pressing.
By
Bill Formella,
April 13, 2020 | 9:06 am CDT
Gluing, Laminating & Veneering
Avoiding wrinkles & stretch marks in 3D laminating
Since the very beginning of my involvement in 3D lamination, I’ve been aware of the problems associated with producing very long parts (4-foot-plus) in a membrane press. One of my earliest experiences providing technical support involved a part that was 4 feet wide and nearly 8 feet in length. “I can’t even get one-third of the parts to come out acceptably,” said this frustrated producer.
By
Bill Formella,
April 3, 2018 | 4:58 pm CDT
AWFS & 3D Laminating
The CPA's 3DL Task Force will work to promote industry best practices in the manufacture, marketing and specifying of 3D laminate components.
By
Bill Formella,
August 14, 2013 | 9:13 am CDT
Gluing, Laminating & Veneering
3D Laminating: The Importance of Good Design
Success in 3D laminating starts with understanding the strengths and weaknesses of the materials and technology involved in the process.
By
Bill Formella,
July 8, 2013 | 4:52 pm CDT
Gluing, Laminating & Veneering
3D Laminating: The Danger of Weak Links
Environmental factors including equipment and materials factor significantly in the success of any 3D laminating operation.
By
Bill Formella,
June 12, 2013 | 10:53 am CDT
3D Laminating: The Next Level
This week I will be meeting with other industry professionals as part of the 3DL Task Force of the Composite Panel Association, to look at the issues of standards and education for 3D laminating.
By
Bill Formella,
March 27, 2013 | 9:04 am CDT
Gluing, Laminating & Veneering
3D Laminating: A Primer of Available Systems
Although it is true that every press technology has its place, there is no doubt that the three-chamber membrane press has become the system of choice for high production.
By
Bill Formella,
March 6, 2013 | 10:36 am CST
Customers Are Not Your 3D Laminating R&D!
This week's 3D laminating installment focuses on how to maintain a healthy approach when investigating new product developments.
By
Bill Formella,
December 5, 2012 | 11:28 am CST
Gluing, Laminating & Veneering
Finishing Expertise from A to Z: AWFI Event
This week I’m taking a break from 3D laminating to cover an exciting development in the world of wood finishing that I had the pleasure of attending.
By
Bill Formella,
October 31, 2012 | 10:43 am CDT
Vacuum 3D Laminators: Simple, Inexpensive, but Limited
The least complex of the 3D laminating systems, vacuum formers rely solely on atmospheric pressure.
By
Bill Formella,
October 16, 2012 | 10:38 am CDT
You submitted this Article: AWFS & 3D Laminating
You submitted this Article: 3D Laminating: The Importance of Good Design
You submitted this Article: 3D Laminating: The Danger of Weak Links
You submitted this Article: 3D Laminating: The Next Level
You submitted this Article: 3D Laminating: A Primer of Available Systems
You submitted this Article: Customers Are Not Your 3D Laminating R&D!
You submitted this Article: Finishing Expertise from A to Z: AWFI Event
You submitted this Article: Vacuum 3D Laminators: Simple, Inexpensive, but Limited
You submitted this Article: Membrane Presses for 3D Laminating: Still More Differences?
You submitted this Article: What’s a Membrane-less Membrane Press for 3D Laminating?
You submitted this Article: 3D Laminating Presses: Understanding the Distinctions
You submitted this Article: Upon Further Review: A Cautious Approach to the Growth of 3DL
You submitted this Article: IWF 2012: A Turning Point for 3D Laminating?
You submitted this Article: Blouses, Cinnamon Bread…and RTF Doors?
You submitted this Article: Is the 3D Laminating Industry Anti-Social?
You submitted this Article: 3D Laminating Demos: Did They Really Tell You Enough?
You submitted this Article: Membrane, Membraneless or Vacuum Press- Oh My!
You submitted this Article: Networking for Success: Taking the Mystery Out of 3D Laminates
You submitted this Article: 3DL Component Quality: Believing Is Not Achieving!
You submitted this Article: 3D Laminating Fundamentals: Summer School for Buyers & Specifiers
You submitted this Article: Woodgrain 3D Laminate: How Real Can It Look?
You submitted this Article: 3D Laminate Components: What Story Is Your Picture Telling?
You submitted this Article: Not Your Mama’s Thermofoil Door?
You submitted this Article: Thermofoil: 3D Laminating Technology Grows Up