ARLINGTON, Texas - SNX Technologies will demonstrate the SNX nVision System1 G3 contour edgebander at Wood Pro Expo Texas (WPE), March 12-13 at the Arlington Convention Center. WPE is being co-located with the Cabinets & Closets Conference & Expo, which opens with a full-day conference on Wednesday, March 11.
Demonstrations of the nVision System G3 the will take place at SNX Technologies' booth #513. The contour edgebander will also be featured in the Running Machine Program taking place throughout both days of Wood Pro Expo.
SNX says benefits of the Minnesota-made contour edgebander, include:
- Easy to operate; new operators can be trained in less than two days
- Capable of edgebanding parts up to 5 ft x 10 ft and from 0.5 in. to 2.25 in. thick
- Can apply edgebanding from 0.5mm to 3mm wide
- Capacity to support a 230-lb part
- Consistent tight butt joints – easy to adjust
For more information about the SNX nVision, visit SNX's website.
About Cabinets & Closets Conference & Expo and Wood Pro Expo Texas
The Cabinets & Closets Expo & Conference (CCCE) is the annual national event for cabinet and closet professionals and is co-located with Wood Pro Expo Texas (WPE), a regional marketplace for the woodworking professionals. The events are organized by Closets & Organized Storage and FDMC magazines respectively, both part of Woodworking Network.
Both the Cabinets & Closets and WPE lead off with a separate full-day executive conference on Wednesday, followed by the two-day expo featuring woodworking machinery and supplies. Additional educational programming is offered on both days of the expo. Tours of local manufacturing plants and the popular Top Shelf Design Awards networking reception are also key components of the event.
The 2020 CCCE and Wood Pro Expo Texas are scheduled for March 11-13 at the Arlington Convention Center, Arlington, Texas.
For information about exhibiting, and sponsorship opportunities, contact Patrick Filippelli of Hall-Erickson Inc. at firstname.lastname@example.org or phone 800-752-6312.
Have something to say? Share your thoughts with us in the comments below.