Profile wrapping and fingerjointing help Contact Lumber optimize materials, while adding value to component products.
Contact Lumber Co., founded in 1946 in Portland, is a long-time leader in the production of profile-wrapped trim, mouldings, window and door parts. Newer marketing ventures for Contact Lumber’s profile-wrapped products include furniture, cabinetry and architectural millwork. In branching out its product line, Peter McKibbin, senior vice president of sales, says Contact Lumber is seeking to become the primary source for ready-to-assemble engineered wood and vinyl components by creating products that help customers eliminate performance problems, manufacturing bottlenecks or both.
Jim Snodgrass, vice president of export sales for Contact Lumber, says profile wrapping offers a cost-effective means of creating quality components. He says it is especially useful when a solid wood component is difficult or too expensive to produce, or simply does not perform as well. While some of Contact Lumber’s profile-wrapped components are made with one-piece softwood cores, the company’s full capability of optimizing materials is seen in its fingerjointing operations. Using Industrial Woodworking fingerjointers, scraps of solid wood and veneer are reconstituted into useful cores and overlays at its 500,000-square-foot manufacturing complex in Prineville, OR. In addition to using solid pine and finger-jointed pine cores, Contact Lumber sizes laminated veneered lumber and sheets of medium density fiberboard into surfaced four-sided blanks that are then moulded to the required profile, as well as vinyl and metal substrates. When expertly wrapped with a high-quality hardwood veneer, these lower-grade cores take on the appearance of solid wood mouldings at a fraction of the price. Profile wrapping also allows manufacturers to incorporate parts that would be hard to make using solid wood. For example, Snodgrass says sleigh-bed rails and bedposts are examples of parts where looks are as important as dimensional stability. Fingerjointing MDF or a lower-grade wood substrate and wrapping it with a premium veneer gives the rail a quality, solid-wood look that holds up for a longer period than solid wood, he says. “Thomasville is a good example of an OEM that has benefited greatly from using our skills to supplement their internal processes,” Snodgrass says. “We provide them sleigh bed rails that are less costly, more dimensionally stable and more readily available than the solid rails they used previously. In addition, since they’ve been working with us to provide them bedposts, their through-put on that part of their production process has improved by 30 percent.” Extensive Product Offering • RTA components for windows, doors, cabinets and furniture; • Oak-Over and Maple-Over mouldings wrapped in veneer; • Embark SL prefinished mouldings and millwork, engraved, stained and embossed to match hardwood grain patterns for major manufacturers’ prefinished door skins; and • Everon Clad components, wrapped with rigid thermofoil for interior and exterior applications. About 40 percent of Contact Lumber’s $75 million in annual sales is generated by wrapped products. The company has 4,000 knives in stock for producing mouldings. The company can create additional profile knives to satisfy custom-orders. In addition, the company offers doors with or without hinges and strikes, sill holes, weather-stripping and corner seals in accordance with individual customer needs.
“We’ve got experience and expertise in so many avenues,” Snodgrass says. “Customers tell us what they want and we give them the finished product. Flexibility is our biggest selling point.” Focus on Value-Added Processes Ten years ago Contact Lumber would build a single flat jamb for an interior door from one piece of clear pine lumber. Today that same piece of lumber yields enough veneer to wrap 17 finger-jointed flat jambs. “And we make a lot of them,” Snodgrass adds. Yet, in spite of the lower costs involved in using lower-grade materials, customers can achieve the looks they want. Plus, in the case of softwood cores, machining is easier and moulding installers benefit because they do not have to predrill nail holes in the wrapped components as they would with solid oak. Contact Lumber uses fingerjointing extensively for making cores and coils of veneer for many of the same cost-cutting, material-saving reasons, Snodgrass says. “Straightness is another big issue,” he says. The increased use of lumber from younger trees means manufacturers have to work with wood that has more inherent problems related to stress and tension. “Fingerjointing takes away all that,” Snodgrass says. Contact Lumber’s flat laminating operations involve gluing surfaced-four-side cores together to make dimensional blanks that can be moulded to a specific profile. Then a veneer is pressed onto the flat surface with a cold press or radio frequency process. Products manufactured this way include furniture posts, and stiles and rails for entry doors. Wise use of resources helps sell wood to environmentally conscious customers concerned about forest habitat, Snodgrass says. He says Contact Lumber’s processes attack those concerns head on. At the same time it is touting its optimization capabilities, the company reminds customers that wood is a renewable resource. Snodgrass says he thinks it is important that people bear in mind “That it’s OK to use wood if you use it sensibly.” Last year Contact’s primary domestic source of wood received SFI (sustainable forestry initiative) certification through the American Forest & Paper Assn. Sensible wood use also relates to constructing split jambs out of one composite piece, which uses 20 percent less wood than building them separately. Some pieces are engineered with oak in the corners, where it is most needed, instead of with solid oak sides. Wrapping is a more labor-intensive production process than putting solid pieces of wood through moulders, Snodgrass says. Some components are too small to wrap; a 1/4-inch by 1/12-inch batten piece is about the limit, he notes. Comparing costs piece by piece may not always fall in favor of wrapping. But the broader cost picture is more important, he says. With savings from reduced waste and labor, the math frequently works out in profile wrapping’s favor, he adds. “It’s an extra step, but it saves you from having to do a lot of other steps,” he says. Face gluing, for instance, is not required as it would be with a solid piece. Quality and Production
Some of the production equipment is built from homegrown designs, while some of the purchased machines have been modified to meet specific company needs. Two of Contact Lumber’s newest pieces of equipment are a Kuper edge-splicer for veneer processing and a Marunaka veneer splicer. Veneer gets extra attention. Strips are finger jointed into long rolls. Great effort is taken to match the grain at the joints to help hide them. A Kuhlmeyer four-head sander equalizes the thickness within tight tolerances and then the veneer is rerolled to achieve accurate tracking once it hits the Duespohl wrapping machines. Most Popular Woods Maple is gaining quickly in popularity, Snodgrass says. “Oak, from a housing standpoint, has dropped back for moulding and millwork.” One recent custom project featured architectural millwork of veneer-wrapped certified MDF for the George Lucas Ranch. Snodgrass says the company hopes to expand its work on furniture and millwork by gradually stepping up its marketing efforts; the small amount of advertising Contact has done to date has mainly targeted window and door industry distributors. Most of Contact’s millwork is destined for the residential market. The company offers a 20-minute fire-rated doorframe. One of Contact Lumber’s big commercial jobs, done for Japan’s Landmark Tower Hotel, included many pieces of wrapped maple and anigre along with the company’s prefinished doors and trim. Contracts for hotel projects such as the one in Japan and others in Hawaii and Taiwan are not easy to land. The trick, Snodgrass says, is to lodge your product and company name in architects’ heads. Future marketing efforts will target that task. Meeting Challenges Another challenge is meeting customers’ lead times, particularly those that have set up just-in-time inventory programs and demand that their suppliers meet their delivery schedules. Snodgrass says Contact Lumber works closely with individual customers to iron out details to ensure regular shipments of required stock items arrive to customers on time. The ability to monitor orders and inventories with computers, plus the development of strong customer relationships, eases the burden, he says. In the final analysis, Snodgrass says, “We go in looking not so much for a product to sell but a problem to solve.” |
Contact Lumber - Stretching Resources to the Max
By
Renee
Stern
.
Have something to say? Share your thoughts with us in the comments below.