WCMA Membership Directory: K to S

The following contains information on companies beginning with the letters K to S who are WCMA members.

Click here for WCMA companies A through J

Click here for WCMA companies T through Z

Click here for WCMA Technology Partners

Kane Hardwood
Kane, PA 16735
Tel: 814-837-6941
www.collinswood.com
Contact: Paul Eastman, ext 2148; Randy Byers, ext 2117; Gary Holmes, ext 2127
Products: FSC Certified, rip stock, moulder blanks, flooring blanks, finger joint blanks, edge-glued panels, laminated posts, mouldings, cabinet frame parts
Species: FSC Certified cherry, hard & soft maple, red oak
Machining: Ripping, cut-to-length, gluing, sanding, D.E.T., moulding, shaping, resawing

Keim Lumber Co.
Charm, OH 44617
Tel: 330-893-2251
www.keimlumber.com
Contact: Noah Yoder
Products: Cabinet parts, drawer sides, stiles & rails, chair parts, blanks, edge-glued panels, lumber, millwork, mouldings, plywood parts, squares, staircase parts
Species: Ash, basswood, birch, cherry, hickory, mahogany, hard maple, red & white oak, white & yellow pine, poplar, walnut
Machining: CNC boring, CNC Machining, finger jointing, CNC routing, sanding, shaping

Kendrick Forest Products
Edgewood, IA 52042
Tel: 563-928-6431
www.kendrickforestproducts.com
Contact: Amanda Burgin
Products: KD lumber, dimension, kitchen & bath cabinets
Species: Ash, basswood, cherry, grey elm, red elm, hard & soft maple, hickory, red & white oak, walnut

Kitchens Plus Inc.
Burlington, IA 52601
Tel: 319-758-0045
www.gokitchensplus.com
Contact: Dennis Fitzgibbon
Products: Table tops, edgebanding, laminated squares, plywood parts, particleboard parts, veneered parts
Machining: CNC boring, CNC Machining, CNC routing

Kitko Wood Products Inc.
Glen Hope, PA 16645
Tel: 814-672-3606
www.kitkowoodproducts.com
Contact: Robert Kitko, Kenneth Kitko
Products: Cabinet doors, drawer fronts & sides, drawer boxes, stiles & rails, chair parts, blanks, edge-glued panels, butcher block, mouldings, veneered parts, rounds, squares, table tops & bases, turnings
Species: Ash, birch, cherry, hickory, hard & soft maple, red oak, poplar
Machining: Routing, CNC routing, face & edge sanding, shaping, tenoning

Kretz Lumber Co. Inc.
Antigo, WI 54409
Tel: 715-623-5410
www.kretzlumber.com
Contact: Tim Kassis
Products: Edge-glued panels, cut stock, S4S, flooring blanks, fingerjoint,
mouldings
Species: Hard maple
Machining: Planing, ripping, chop saws, optimizing chop, sanding, gluing, industrial finger jointer, moulding

Lambton Manufacturing Ltd.
Lambton, QC G0M 1H0
Tel: 418-486-7451
www.lambton.com
Contact: Richard Dumont
Products: Hardwood components, stair parts, edge-glued panels, squares, dimension parts, blanks, mouldings
Species: Northern red oak, hard white maple, yellow birch, others on request
Machining: Kiln drying, rough cut mill, edge & face gluing, double end tenoning, finger jointing, moulding, shaping, turning, planing, CNC routing, sanding

Lauber Manufacturing Co.
Archbold, OH 43502
Tel: 419-445-7550
www.laubermfg.com
Contact: Bruce Lauber
Products: Hardwood components, mouldings, S4S, S2S, with or without tenons, including step tenons, door frames, cut-to-size blanks
Species: Red & white oak, hard & soft maple, poplar, cherry
Machining: Tenon, mould, miter, cope, mortise, boring, edge & face gluing, rout, shape, CNC, sanding

Lewis Lumber Products Inc.
Picture Rocks, PA 17762
Tel: 570-584-4460
www.lewislp.com
Contact: Mike Mamrak, Ed Pry
Products: FSC Certified mouldings & lumber, custom profile mouldings, ripped moulder blanks, chop to length mouldings
Species: Black cherry, white hard maple, soft maple, red oak, poplar, ash, birch, eucalyptus, and 20 other hardwood & softwood Species
Machining: Color scan optimize rip, S2S, rip 1 edge, chopping, optimized chopping, moulding

Louisiana Cabinet Doors Inc.
Lake Charles, LA 70601
Tel: 337-497-0555
[email protected]
Contact: Billy Caldwell
Products: Solid wood cabinet doors, drawer fronts
Species: Alder, ash, birch, cherry, Spanish cedar, cypress, hickory, beech, mahogany, maple, red & white oak, knotty pine, walnut

Marsh Lumber Co.
Pamplico, SC 29583
Tel: 843-493-5111
[email protected]
Contact: Bruce Collins
Products: Dimension stock, cabinet doors
Species: Maple, Northern hard & soft maple, oak
Machining: Planing, moulding

Meeder’s Dimension & Lumber Products
Mancelona, MI 49659
Tel: 231-587-8611
[email protected]
Contact: Shannon Meeder
Products: Drawer fronts & sides, blanks, edge-glued panels, butcher block, millwork, wall paneling, mouldings, laminated squares
Species: Ash, aspen, basswood, birch, cherry, elm, hard & soft maple, red oak, white pine
Machining: Custom kiln drying, face sanding, straight line rip, double-end tenoning, gluing, chopping, gang-rip, rough surfacing sawing.

Menominee River Lumber & Dimension
Menominee, MI 49858
Tel: 906-863-2682
www.mrlandd.com
Contact: David Geier, 906-864-1909
Products: Custom hardwood dimension, window & door components, cut-to-size blanks, edge & face glued panels, butcher block tops, edge-banded plywood parts
Species: Hard maple, cherry, mahogany, red oak, northern hardwoods, imported woods
Machining: Planing, ripping, chopping, gluing, sanding, trimming, boring, edge-banding, panel sawing

Meridian Products
New Holland, PA 17557
Tel: 717-355-7700
www.meridianproduct.com
Contact: Sparky Grace
Products: Cabinet doors, solid wood doors, MDF doors & door cores, cabinet parts, drawer fronts & sides, drawer boxes, stiles & rails, mouldings, fireplace mantels/surrounds, wainscoting
Species: Alder, ash, birch, cherry, hickory, mahogany, hard & soft maple, red & white oak, pecan, white & yellow pine, poplar, walnut, lyptus, MDF
Machining: Boring, finishing, mortising, routing, face & edge sanding, shaping, tenoning

Michigan Chair Co.
Howard City, MI 49329
Tel: 231-937-4367
www.michair.com
[email protected]
Contact: Timothy Hoolsema, Robert Hoolsema, Jr.
Products: Solid wood steam bending
Species: Ash, cherry, hard & soft maple, red oak, walnut, poplar
Machining: Custom steam bending

Middle Tennessee Lumber Co.
Burns, TN 37029
Tel: 615-446-3461
www.middletennlumber.com
Contact: Bill Joyce, Mike Lewis, Tim Ellrich
Products: Mouldings, moulding blanks ripped to width
Species: Red oak, poplar, hard & soft maple
Machining: Planing, ripping, moulding

Mi-Lin Wood Products Corp.
Paoli, IN 47454
Tel: 812-723-3799
[email protected]
Contact: Donna Gehl
Products: Dovetail drawer boxes, drawer parts, glued solid wood panel stock, frame stock, cleat stock, cut-to-length & random, flooring
Species: Ash, beech, poplar, red & white oak, hard & soft maple, sycamore,
walnut
Machining: Wide belt sanding, moulding, boring, tenoning UV finishing, assembly

Miller Wood Designs
Sugarcreek, OH 44681
Tel: 330-852-0689
www.miller-wooddesign.com
Contact: Raymond Miller, Mary Esther Miller
Products: Laminated squares, stair treads, edge-glued panels, specialty turnings
Species: All North American hardwoods
Machining: Moulding, planing, sanding, CNC turning lathe

Monticello Wood Industries
Monticello, KY 42633
Tel: 606-348-8491
[email protected]
Contact: Jerry Kinkade

Morse Hardwoods & Millwork Co.
Essex Junction, VT 05452
Tel: 802-878-2061
www.morsehardwoods.com
[email protected]
Contact: Brad Morse
Products: Flooring, mouldings, furniture components & parts, dimension blanks, stairs, stair parts
Species: All domestic species, mahogany, Brazilian cherry, Spanish cedar
Machining: Moulding, gang ripping, precision cut off saws, sanding, resawing, straight line ripping, stair routing, optimized gluing

Moslow Wood Products
Powhatan, VA 23139
Tel: 804-598-5579
www.moslowwood.com
Contact: James Moslow
Products: Edge-glued panels, plywood parts, particleboard parts, toy parts, custom wood parts for the award and advertising specialty industries
Species: Alder, ash, beech, birch, cherry, hickory, mahogany, hard & soft maple, red & white oak, poplar, walnut, MDF
Machining: Laser engraving, boring, CNC machining, finishing, routing, CNC routing, face & edge sanding, shaping

Nickell Moulding Co.
Elkhart, IN 46515
Tel: 574-264-3129
www.nickellmoulding.com
Contact: George Nickell
Products: Picture frame mouldings, architectural mouldings
Species: Poplar, ash, pine
Machining: Wrapping, foil, Compo embossing, paint & stain finishing

Nicobois Inc.
Nicolet, QC J3T 1T5
Tel: 819-293-4660
www.nicobois.com
Contact: Michel Bergeron
Products: Chairs, chair parts
Species: Oak, maple, soft maple, ash, cherry, pine, birch
Machining: All CNC, high and low volume orders

Northland Corporation
LaGrange, KY 40031
Tel: 502-222-2535
www.northlandcorp.com
Contact: Tim Girardi
Products: Blanks, S2S, lumber to 16/4
Species: Alder, ash, basswood, beech, birch, cherry, hickory, mahogany, hard & soft maple, red oak, poplar, walnut
Machining: Surfacing, straight line ripping

Northland Forest Products Inc.
Shakopee, MN 55379
Tel: 952-445-9663
www.nfpi.com
Contact: Dick Pyle, Greg Brevig, Gary Ellworth, Cliff Gabrielson
Products: Dimensional S4S boards: 1/2, 4/4, 5/4, 8/4, custom-sized S4S, architectural mouldings, primed finger jointed S4S boards, mouldings, flooring
Species: Red oak, poplar, hard & soft maple, birch, cherry, alder, radiata pine
Machining: Full rough mill, sanding, resawing, fingerjointing, moulding

O.B. Milling
Spring Church, PA 15686
Tel: 724-478-1935
www.obmilling.com
Contact: Daniel Obriot
Products: Cabinet doors, cabinet parts, drawer fronts, drawer sides, drawer boxes, stiles & rails, blanks, edge-glued panels, millwork, mouldings, rounds, squares, stair parts, treads, handrails, table tops & bases, lumber
Species: Ash, basswood, birch, cherry, hickory, mahogany, hard & soft maple, red & white oak, white pine, poplar, any others
Machining: Assembly, face sanding, shaping

OFS Brands
Leitchfield, KY 42754
Tel: 812-683-7500
www.styline.com
Contact: Eric McMichael
Products: Cabinet parts, drawer fronts & sides, bendings, chair seats & parts, S2S, S4S, E4E, edge-glued panels, millwork, mouldings, plywood parts, rounds, squares, stair parts, treads, risers, handrails, upholstered frame stock
Species: Ash, aspen, beech, hickory, hard & soft maple, poplar, walnut
Machining: Assembling, boring, CNC boring, CNC machining, finger jointing, mortising, routing, CNC routing, shaping, steam bending, tenoning

Osborne Wood Products Inc.
Toccoa, GA 30577
Tel: 706-886-1065
www.osbornewood.com
Contact: Martha Albea
Products: Lineal mouldings, mouldings, table bases, turnings, extra large turnings
Species: Alder, birch, cherry, hickory mahogany, hard & soft maple, red oak, white pine, ponderosa pine, walnut

Patrick Industries Inc.
Elkhart, IN 46515
Tel: 574-294-7511
www.partrickind.com
Contact: Dino Piraccini
Products: Cabinet doors, RTF doors, MDF doors, cabinet parts, drawer fronts & sides, stiles & rails, blanks, edge-glued panels, lineal mouldings, mouldings, MDF mouldings, plywood parts, particleboard parts, veneered parts, edgebanding, paper & vinyl laminated panels
Machining: Finishing, face & edge sanding, tenoning

Penn Wood Products Inc.
East Berlin, PA 17316
Tel: 717-259-9551
www.pennwoodproducts.com
Contact: Kraig Coxon, Angie Harper
Products: Prefinished mouldings, unfinished mouldings, stair treads & risers, lumber
Species: All domestic and exotics: Asian, African, Australian and South American
Machining: Moulding, equalizing, end matching, finishing

Phoenix Mfg. of Georgia
Villa Rica, GA 30180
Tel: 770-459-5255, 866-582-0730
www.phoenixmfgofga.com
Contact: Don Glenn
Products: RTA furniture components, laminated panels with light weight papers, cabinet doors, closet melamine parts, MDF doors, cabinet parts, drawer fronts & sides, drawer boxes, casket parts, chair parts, MDF blanks, plywood parts, particleboard parts, veneered parts, MDF stair treads, table tops, toy parts, upholstered frame stock, OSB packaging components
Species: Particleboard, MDF, melamine, OSB, plywood, hardboard
Machining: Cut-to-size panel sawing, assembly, boring, CNC boring, CNC machining, routing, CNC routing, edgebanding, drilling

Precitech International Inc.
Sainte-Rose Watford, QC G0R 4G0
Tel: 418-267-4155
www.precitech-int.com
Contact: Charles Audet, Olivier Vermette
Products: Musical instrument parts, cut-to-size, sport flooring 22mm fingerjointed, pre-oiled flooring
Species: Hard maple

Rapid Lumber Inc.
Pointe Claire, QC H9R 1H1
Tel: 514-694-4950
www.rapidlumber.ca
Contact: Andy Tsartolias
Products: Stair treads, classic and eco-, newel post blanks, turned newel posts, sills, saddles
Species: Northern red oak, hard maple, cherry
Machining: Double end trimming, shaping, surfacing, sanding

Real Wood Products Inc.
Madison, FL 32341
Tel: 800-835-8752
www.realwoodproducts.net
Contact: Jan Keeling
Products: Cabinet doors, drawer fronts, drawer boxes, lineal mouldings, fireplace mantels/surrounds, wainscoting, paneling, mouldings
Species: Alder, ash, basswood, beech, birch, butternut, cherry, chestnut, hickory, mahogany, hard & soft maple, red & white oak, pecan, white & yellow pine, ponderosa pine, poplar, walnut, MDF

Roland Boulanger / Lega Ltd.
Warwick, QC J0A 1M0
Tel: 819-358-4100 800-363-5168
www.boulanger.qc.ca
Contact: Richard Leclerc
Products: Decorative wood mouldings, millwork, components
Species: Eastern white pine, MDF, oak, birch, maple
Machining: Fingerjointing, moulding, precision end cut, drilling, bar coding, priming, embossing, wrapping: vinyl, paper, wood veneer

S. F. Spector Inc.
Harrisburg, PA 17110
Tel: 717-236-0805
Fax: 717-236-1215
Contact: Steve Spector
Products: Office furniture, exterior architectural millwork, prehung solid entrance doors, curved mouldings, millwork
Species: Cherry, African mahogany, Spanish cedar, white oak
Machining: S4S up to 6” x 18”, S2S up to 10” x 10”, moulding up to 5” x 9”, CNC machining center

Salem Frame Co. Inc.
Salem, VA 24153
Tel: 540-389-8661
www.rowefurniture.com
Contact: Eric Collins
Products: Dimension, edge-glued panels, furniture frames
Species: Soft maple, poplar, other mixed hardwoods
Machining: Trimming, boring, dowelling, sanding, profiling, custom kiln drying

Sanford-Lussier Inc.
Huntington Park, CA 90255
Tel: 323-585-2811
www.sandfordlussier.biz
Contact: Al Bradley
Products: Hardwood mouldings, flooring, stair products
Species: Red & white oak, hard maple, hickory, jatoba, alder, birch, walnut, black cherry, poplar
Machining: Rip sawing, planing, moulding, gluing, finger jointing, cut line, resawing

Sargent Wood Products Inc.
Gardner, MA 01440
Tel: 978-632-9333
www.sargentwoodproducts.com
Contact: David Sargent
Products: Store displays, furniture components, outdoor furniture, frames
Species: Maple, birch, poplar, oak, cherry, plywood, melamine
Machining: CNC machining, sanding, boring, mortising, tenoning

Sawyer Bentwood
Whitingham, VT 05361
Tel: 802-368-2357
www.sawyerbentwood.com
Contact: George Campo
Products: Solid wood steam bendings, dowels, bent spindles, solid wood edge bands
Species: Ash, birch, cherry, maple, oak, walnut
Machining: Moulding, doweling, bending

Schafer Woodworks Inc.
Tecumseh, MI 49286
Tel: 517-423-4661
[email protected]
Contact: Scott Schafer
Products: Moulded components, glue staves, flooring
Species: Red & white oak, hickory, cherry, hard maple, walnut ash
Machining: Gang ripping, moulding, precision cut-to-length

Sears Trostel Lumber Co.
Ft. Collins, CO 80524
Tel: 970-482-0222
www.sears-trostel.com
Contact: Steve Schwartz
Products: custom solid wood mouldings, S4S cabinet components, profiled cabinet components
Species: Alder, red & white oak, cherry, hard & soft maple, hickory, walnut, poplar
Machining: Moulding, gang ripping, cut-to-length

Simon Lussier Ltee
Blainville, QC J7C 3V5
Tel: 450-435-6591
[email protected]
Contact: Mario Lussier
Products: Blanks, S2S, lumber to 12/4
Species: Aspen, birch, cherry, hard maple

Southeastern Wood Products Inc.
Martinsville, VA 24112
Tel: 276-632-9025
[email protected]
Contact: Tommy Snipes
Products: Chair frames, exposed wood & fully upholstered, chair parts, turnings, carvings, table bases, drawer fronts & sides, stiles & rails, solid & laminated squares, edge-glued panels, rounds, stair parts, spindles & risers, newel posts
Species: Ash, beech, cherry, gum, hickory, mahogany, hard & soft maple, red & white oak, white pine, poplar, tupelo, walnut, rubberwood
Machining: Assembly, carving, routing

Sparta Woodworks
Sparta, TN 38583
Tel: 931-738-1896
www.spartawoodworks.com
Contact: Jay Dee Hanna
Products: Furniture components for chairs, tables, desks; turnings, mouldings, lumber, specialty products
Species: Ash, beech, cherry, hard & soft maple, red & white oak, sycamore, walnut
Machining: Assembling, boring, finishing, mortising, moulding, routing, sanding, shaping, tenoning, turning, CNC machining

St. Croix Valley Hardwoods
Luck, WI 54853
Tel: 715-472-2131
www.scvh.com
Contact: Jim Giller
Products: Edge-glued panels, dovetailed drawer parts, drawer fronts, stiles, rails, face frames, mouldings, flooring, paneling
Species: Cherry, hard & soft maple, hickory, red & white oak, aspen, alder, northern white pine, yellow poplar
Machining: Ripping, surfacing, gluing, moulding, boring, end matching, sanding, shaping

States Industries Inc.
Eugene, OR 97401
Mocksville, NC 27028
Tel: 541-688-7871
www.statesind.com
Contact: Bill Powell
Products: Components produced from veneered panel goods including prefinished drawer sides and assemblies, shelves, carcass components, slab doors and tops
Species: All domestic and most imported veneers
Machining: Full panel processing, edge banding, dowel insertion, finishing

Sunway Inc.
Centuria, WI 54824
Tel: 715-646-1800
www.sunwayinc.com
Contact: Bambi Singer
Products: Cabinet doors, RTF doors, MDF doors, cabinet parts, drawer fronts & sides, plywood parts, particleboard parts, table tops
Species: MDF
Machining: Assembly, boring, CNC boring, CNC routing, CNC machining

Have something to say? Share your thoughts with us in the comments below.