An array of door and drawer components. Pictured left to right: Drawer Box Specialties (DBS), BHK of America, Caron, Elias Woodwork, Carolina Drawer, Witmer Wood, Keystone Wood Specialties and JB Cutting.

The design, usage and functionality of cabinet doors and drawers are evolving to meet the needs of users who want cost-efficient and beautiful components, but may also require products for an aging population. For more cabinet door and drawer manufacturers in the marketplace, visit the Components & Assembly chapter at

DBS introduces a fully automatic recycling center. Powered by a programmable chip, the Helping Hands Trash Center opens with a toe-kick activated pedal and closes automatically. It can be programmed to stay fully open from three seconds to 30 seconds, or can stay open indefinitely. It requires a 15-in. cabinet opening and 21-in. height clearance. (714) 744-4247,

Most cabinet doors by Keystone Wood Specialties are available in frame-only and multi-lite versions, including several designs created to be multi-lite doors in their own right. Available in more than 20 species, doors may be ordered polish sanded, ready to finish, or finished in one of Keystone’s more than three dozen finishes; custom finishes are available. (800) 233-0289,

Clockwise: CabParts, Gingrich Woodcraft and Conestoga
Wood Specialties
Clockwise: Cal Door, Decore-ative Specialties, Western Dovetail
Clockwise: Rev-A-Shelf, Northern Contours, CCF
Top: TaylorCraft. Bottom: WalzCraft

Elias Woodwork’s new Shallow Shaker cabinet door comes in three sleek edge designs for modern closets and kitchens. The Shallow Shaker doors feature a panel that is only slightly recessed, resulting in a near slab look with a touch of detail. (800) 665-0623,

BHK of America has gained FSC certification (BV-CoC-006121) for its line of RTA drawer systems. BHK says its offering of FSC-certified products, as well as non-certified components, allows customers to make choices based on the budget for their project. (800) 724-4212,

JB Cutting introduces an additional raised panel door profile to its standard offerings. The new door is a four-pass profile, coded N402. This new profile is similar to the N400, with a more chiseled looking line-detail that pronounces the center panel. (586) 468-4765,

Caron says its new Euro+ laminated wood door collection features a sleek design, rich finishes and more solid wood for increased durability. Offering a modern, clean look, Caron says the doors finish nicely with either a solid wood perimeter or aluminum T moulding to match appliances. (800) 463-7060,

CabParts manufactures frameless cabinet boxes, drawer boxes, contemporary fronts and closet systems, milled for either Confirmat screw or dowel and glue assembly. They are manufactured order-specific, with no minimums and sized to specifications. They are produced from available sheet goods, including NAUF. (888) 398-1804,

Conestoga Wood Specialties says its Montclair door and matching drawer front offer an affordable price point alternative to applied moulding doors. Based on a miter profile, the Montclair provides a subtle design element for modern kitchens and is available with both raised and recessed panels. (800) 964-3667,

Gingrich Woodcraft’s new Waste Bin Pullouts are designed for installation on undermount hardware, with the cabinet door attached to the front. Available in a variety of wood species, the pullout is dovetailed and can be custom sized. The 20, 35 and 50 quart bins come with lids attached. (877) 368-8245,

Carolina Drawers offers solid wood and plywood drawers, as well as components made from domestic materials, with a concentration on birch plywood and birch/maple solid hardwoods. The company can laser and burn in logos and offers custom packaging and labeling. A Quickship program also is available. (336) 357-0777,

Witmer Wood Products offers Sherwin-Williams’ Kem-Aqua water-based lacquer finish for its assembled dovetail drawer product line. The drawers and trays are offered in nine wood species including: birch, cedar, cherry, mahogany, brown soft maple, red oak, walnut, white hard maple, and white oak. (800) 643-1158,

Among Cal Door’s new looks is the rope-applied moulding design, available in the Maine door style, in maple with matching drawer front. Cal Door says all of its hardwoods are hand-selected, color and grain matched. (408) 782-5700,

Decore-ative Specialties offers a comprehensive designer frame program, providing products from square-edge and beaded frames, to high-end inset moulding frames. The items are available in a variety of materials, 13 unique frame edges, assembled or unassembled, finished or unfinished. (800) 729-7277,

Western Dovetail offers recycle pullout drawers utilizing Blum’s Tandem 568R waste recycle pullout slide, with servo drive available. The drawers are available for single axial and double lateral 35 qt bin sizes, with scalloped sides and are notched and drilled for tandem. Other bin sizes are available. (800) 800-3683,

Top Drawer Components offers dovetail drawer boxes as well as a wide selection of cabinet door styles: miter, mortise and tenon, raised panel, cope and stick, flat panel and solid wood. The company says products are FSC certified, LEED accredited and CARB compliant. (800) 745-9540,

Cabinet and closet component manufacturer Cabinet Outsource offers modular cabinets that are fabricated to size and material specifications. Materials include veneers, plastic laminates and melamine, with edgebanding from 0.5mm to 3mm thickness. (714) 671-7720,

Available from AMS, Castlewood birch plywood drawer sides feature a tight birch core that is free from voids, core overlaps and is CARB compliant. Drawer side blanks come in 96-in. lengths with the top edge banded, and are available in heights from 2 in. to 12 in. They are grooved to accept up to a 5mm drawer bottom.
(800) 346-4042,

Drawer Connection has received FSC certification as a Chain-of-Custody partner. It has met and put in place the correct and proper procedures, which allows it to monitor and track materials that are FSC certified, the company says. (877) 917-4887,

CCF’s Humidrawer is made with the aficionado in mind. CCF says this attractive drawer is lined with Spanish cedar and can be manufactured in the end user’s choice of one of many fine wood selections, with custom sizes, personalized sliding lid and custom dividers available. (800) 581-3683

Rev-A-Shelf has partnered with Blum to offer electric-assist waste containers. They are available as a complete kit, with a dovetail maple drawer box, adjustable door mounting brackets, polymer waste container, plus Blum’s TANDEM concealed runners, BLUMOTION soft-close and servo-drive touch-to-open. (800) 626-1126,

Northern Contours has made two additions to its Level Series of acrylic and thermofoil components. Wired Mercury, Wired Bronze, Wired Copper and Wired Cobalt are available with matching, steel gloss or 3-D aluminum edgebanding. Level with 2-part edgebanding is available with ruby red, black or white acrylic fronts. (866) 344-8132,

Indiana Dimensions Inc. offers cabinet door and drawer components. IDI says its cabinet doors are glued with pins inserted at each joint and the mitered doors feature a true mortise and tenon joint. Other door styles include arched, flat and raised panel. Doors are available in 11 species. (888) 875-4434,

Cimarron Drawer’s products come in a variety of wood species, with front or side scooping and dowel or dovetail joinery. Dividers can be removable or fixed, and laser engraving is available. (888) 643-2302,

TaylorCraft manufactures radius cabinet components including: doors, drawer fronts, face frames, drawer box fronts and mullion doors. They are available convex or concave, with more than 70 profile options, and can be made from any species, as well as NAUF core material, FSC-certified materials and environmentally responsible Echowood veneers. (866) 585-7623,

WalzCraft introduces French mitered cabinet doors to its line of custom components. WalzCraft says the doors use mitered stiles and rails to create the look of a traditional mortise and tenon cabinet door with an applied moulding. WalzCraft can also modify the width of the stiles and rails, commonly done with five-piece drawer fronts. (800) 237-1326,

Valley Custom Door says it can supply components needed for cabinet refacing projects. Among the product offerings are: beaded face frames, dovetail drawer boxes, wine rack lattice, mouldings, fluted rails and rosettes, corbels, wood face-frame stock and veneer sheets. (920) 336-3174,

Alabama Inter-Forest, a subsidiary of Panel Processing, offers dovetail drawer kits in five finishes: white, woodgrain print and unfinished 1/2-in. MDF, and prefinished and unfinished 12mm Baltic birch. Sizes run from 2-in. to 11-1/2-in. heights, 9-in. to 24-in. depths, and 6-in. to 28-in. widths in 1/16-in. increments. (334) 687-8009,,

Cabinets Quick offers customized modular cabinet parts in dowel or Confirmat construction. A modular-style catalog is available electronically and in hard copy formats to construct custom cabinets of any size or configuration with any type of material. Cabinets can be ordered assembled or flat-stacked. (714) 532-9005,

Winner of a 2010 IWF Challengers Award, Cabinotch provides custom cabinet panels and frames, while assembly of the flat-packed components takes just minutes. The company adds the Cabinotch system takes the time and effort out of manufacturing the boxes. (877) 413-4299,

Have something to say? Share your thoughts with us in the comments below.