Martin Goebel Has Big Plans
By Scott Wunder | Posted: 07/14/2013 5:44PM
About two weeks ago we milled a big black oak log for our friend Martin Goebel of Goebel & Co. Furniture. It looks like he has some big plans, and they include a large tabletop for a customer.
Our mission was to get at least one good slab, cut at 4″ thick, that would stay together through the drying process. The log was stout with a lot of character and a few bad spots, but it was so big that getting some slabs that met the requirement was no problem.
This is the first log that I have milled on the Lucas Mill that required the mill to be jacked up (by about 10″) to get started. The mill will cut up to 62″ wide with the chainsaw slabber attachment, and we still had to trim both sides of the butt end for the log to fit. We milled the bottom log with the slabber, and Roger Branson of Red Rooster Sawmill cut up the top logs on his Wood-Mizer LT40.
In all we got about 1,600 board feet out of the tree, with about 1,000 board feet coming out of the bottom 10′ log.
After the milling we got all of the wood back in the shop and stacked to start drying. It is nutty to know that the lumber is so big that it takes two of us just to slide one end of the slab on to the sticks. Luckily, the stacking is done, and now we wait, with our fingers crossed, in hopes that nothing breaks as it dries.
Guest Blogs Welcome
Got a viewpoint you would like to share with our online woodworking community? Woodworking Network welcomes guest blogs from wood products professionals. Submit your musing, comments and opinions to Rich Christianson, Editor at Large, at email@example.com.
About the Author
Scott WunderFrom felling the trees through installation of the final piece Scott Wunder, owner of WunderWoods in St. Charles, MO, shares his woodworking knowledge with anyone that will talk to him about wood. Whether you want to learn about milling lumber or need help on a project, get your fill of woodworking infotainment at WunderWoods.com. Scott writes about all aspects of woodworking and specializes in finishing (mostly because no one else likes to sand).