SAWTOOTH SHELF SUPPORT SYSTEM

Sawtooth Shelf System | Posted: February 28, 2012 - 02:00 AM

 

The Sawtooth Shelf System is a cost-effective revival of a method used to make shelves adjustable in cabinetry and millwork for hundreds of years. The system consists of wood supports in each corner of a cabinet, which hold adjustable cleats on which to rest the shelf. Triangular or sawtooth cuts in the support piece need to be accurate and were typically made by hand but the Sawtooth Shelf System has developed the technology to recreate the cut with an accuracy of plus or minus .005, says the company, offering added value that is cost effective. Sawtooth Shelf Systems are available in three styles: Continuous, with cuts running the entire length of the support; Traditional, the sawtooth cut starts between 8 and 12 inches from the bottom and stops the same distance from the top; and Spaced, common in European built-ins, with three sawtooth cuts that start 12 inches from the bottom of the cabinet and repeat on 12-inch centers, for a more contemporary look. The systems are available in lengths of 3', 4', 5', 6' and 7' and custom lengths by order. Woods used include poplar, red oak, white oak, cherry and sapele with other species available by order. Available in sets of four or in bulk packs of 24. 

(908) 689-7600. SawtoothShelfSystem.com.

 

More products from Sawtooth Shelf System


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

 

More products from Sawtooth Shelf System Company

SAWTOOTH SHELF SUPPORT SYSTEM
Sawtooth Shelf System

     

Search our database for woodworking equipment, supplies and services:

Select a category:


Feedback Form
Feedback Form