Delta Power Equipment Corp. introduces the Oscillating Spindle Floor Sander, Model 31-484 featuring a 0° to 45° tilting spindle arbor design, which allows the woodworker to adjust the sanding angle and to bevel sand while the table remains flat. It has adjustable positive stops at 45° and 90° and a large bevel scale. It also features a 24-5/8-inch x 24-1/2-inch cast iron table and enclosed steel-frame construction for dust management and minimum vibration. It has a heavy duty, cast iron trunnion system and a 1 HP, 110V motor with 1,725 RPM spindle speed and 71 oscillations per minute plus a removable rear access panel. Precision ball bearings support the main spindle and heavy duty worm and gear mechanism drives the oscillations. It features on-board storage for all inserts, spindles and wrenches and comes with 10 interchangeable threaded spindles with 100-grit sanding sleeves (1/4 in., 3/8 in., 1/2 in., 5/8 in., 3/4 in., 1 in., 1 1/2 in., 2 in., 3 in., and 4 in.), 6 inserts, power lock-off pin and 2 wrenches.

(800) 223-7278.  DeltaMachinery.com.