IWF 2012: Last Take on Hardware, Tools

By Jared Patchin | Posted: 10/09/2012 10:00AM

 

J Alexander Fine Woodworking Jared Patchin   I suppose after a month has passed, I should probably have my IWF 2012 recap completed, so here is the last entry of my experience.

Friday was the third and last day for me. The show lasted through Saturday afternoon, but I was scheduled to fly home, which was not a bad thing, since my feet were sore and tired from all the walking, and I pretty much saw everything I needed to see. Friday turned into a recap day for me, visiting certain booths for a bit more investigation and education.

J Alexander Fine Woodworking Jared Patchin  

Jared Patchin's
IWF 2012

>>Discovering Metallic Veneer

>>An Edgebander Buy

>>My First Woodworking Fair

>>IWF Planers, Jointers, Spiral Cutter

>>Staple and Nail Guns, Tool Organizers

>>IWF 2012: Last Take on Hardware, Tools

>>IWF 2012: Finding Paneling

 

I started out the day at 8 a.m. by interviewing the fine folks at Hettich for a video with WoodworkingNetwork.com. After the video was complete, I ventured into the now familiar territory of the two exhibit halls.

The first booth I stopped at belonged to Grass. I had never used Grass products before, but I had heard a lot about their products, and since I wanted to begin pushing undermount slides in my company’s cabinetry, I decided to stop and look. I was really impressed.

From what I could tell, Grass and Blum are pretty much on the same level as each other, when it comes to quality, product offerings, and features. The Grass DynaPro 2D and 3D slides functioned beautifully. The product that really caught my eye was their Tiomos soft close hinge.

Tiomos has three levels of soft-close functionality: light, medium, and strong, all built into an elegant hinge. As a comparison, the Salice soft-close hinges are always “on” and the Blum soft-close hinges are either “on” or “off”. Depending on the price, this will be my hinge of choice, as will their DynaPro 2D undermount slides.

Another discovery, thanks entirely to the IWF show, was insert shaper tooling. I had heard about insert tooling before, but, like thousands of things in a busy life, I ignored it because I didn’t have time to investigate.

While insert tooling is more expensive in the beginning, because of the up-front costs of the shaper head, the long term costs can be lower, since you are only replacing insert blades, not the entire head. But I learned that there are many other benefits as well.

The best one, in my opinion, is the fact that the cope and stick profiles on the insert blades will always mate perfectly, since the profiles never change due to sharpening. When the blades become dull, which takes far longer with the insert blades, they are replaced with brand new blades. Goodbye loose and sloppy fitting rails and stiles.

A cabinet shop can also eliminate a wall full of shaper bits, and scale down to six heads in total for door production, since multiple profiles share the same head. I was able to speak to the fine folks at Freeborn and Royce Ayr at the show, and was incredibly impressed with the products from the latter’s collection. With the addition of a new 7.5 HP shaper in our shop, we are ready to add some new shaper bits to our collection, and build some doors.

 

About the Author

Jared Patchin J Alexander Fine Woodworking Network

Jared Patchin

Jared Patchin started woodworking professionally in 2008 when he set-up J.Alexander Fine Woodworking in Boise, ID, where he builds custom crafted furniture and cabinetry. He started building furniture at the age of seven when his father bought Shutter Crafts. He has developed his craft since then, moving from making wooden swords for himself and his friends to building some of the finest furniture and cabinetry available. He lives in Boise, Idaho with his wife and two young sons, who have taken over the sword making side of things.

Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

 

View all events >
FEB
01

Woodex

Teheran
NOV
19

Yiwu Woodwork Fair 2014

Yiwu Zhejiang
DEC
03

IIDEX Canada

Toronto , ON
Search our database for woodworking equipment, supplies and services:

Select a category:


Feedback Form
Feedback Form