2014 Top Shelf Finalist: Dorothy Leung, SpaceSolutions.ca

Posted by Michaelle Bradford | Posted: 03/20/2014 9:36AM

 

Dorothy Leung, SpaceSolutions.ca, is a finalist in the 2014 Top Shelf Design Awards competition with her project " Murphy Bed with Desk & Storage"  entered in the Specialty category.

Project Description: Queen Side-Tilt Murphy Bed with pillow storage box behind. Structure includes recessed overhead storage, an adjacent desk and a wardrobe for clothes storage. Also includes lighting both inside bed cabinet and above desk. Designer - Dorothy Leung

List materials used in the project, including wood, veneer, laminate, hinges, decorative accessories, etc.: Woodgrain melamine (“Looks Likatre” by Panolam) and high-gloss white thermofoil doors. Lift-up doors above bed using flap stays. Soft-close hardware used on all doors and drawer. Warm White LED lights on two separate sets – one inside bed cabinet and another above the desk surface. Chrome closet rod inside wardrobe and stainless steel handles on all doors and drawer.

Describe any design challenges, i.e. obstructions, etc.: The goal with this project was to create a multi-purpose space. The client’s niece was staying with them to attend school, so a bed was needed, and at the same time, the husband uses this as his workout room, so to facilitate that, a Murphy Bed made the most sense so that there would be room to use the treadmill, etc. The adjacent desk area was created as a work surface for the niece, and the wardrobe provided for her as well. Above the bed area is a bulkhead coming down from the ceiling, and in addition, that bulkhead contains speakers for the in home sound system which could not be blocked. To deal with this, a Side-Tilt Murphy Bed was required, and the cabinetry above needed to be recessed (14” deep, compared the rest of the cabinets at 24” deep) to leave the speakers exposed. Pillow storage was then created behind the bed, pushing the bed a bit further into the room – another reason that the Side-Tilt layout was best. Lastly, the client did not want the desk area to be permanent after the niece moves on, so a base was included below the drawer to allow for an easier addition of lower doors to that space in the future.

Was the design created by hand or software program? If software program, which one did you use?: By hand

Describe the installation process and any challenges.: The installation took place over parts of three days. We always pre-assemble our structures at the shop to make sure there are no surprises, and then separate the parts and rebuild on site. This project went it very smoothly, with the most time-consuming aspects being cutting and fitting the trims and fillers, as well as threading the wiring for the lights behind and through the cabinets. We made the back panel below the desk a hinged piece to allow for electrical access if it is ever needed.

Project Title:Riva Garage
Project Description:In order to have a clean look the client requested a floor based unit. A platform base was constructed to create this look with out toe kicks. Before installation the client was instructed to have floor expoxy done before setting any wood on top of concrete. Normally there are leveling legs that would be sitting on the cement. Never any wood.
List materials used in the project, including wood, veneer, laminate, hinges, decorative accessories, etc.:Black and Gray Melamine 3/4" thick with Classic soft edge. Design Wall with Bike Racks is shown.
Describe any design challenges, i.e. obstructions, etc.:In order to have a clean look the client requested a floor based unit. A platform base was constructed to create this look with out toe kicks. Before installation the client was instructed to have floor expoxy done before setting any wood on top of concrete. Normally there are leveling legs that would be sitting on the cement. Never any wood.
Was the design created by hand or software program? If software program, which one did you use?:Hand drawn design
Describe the installation process and any challenges.:The flooring had to be completed before we installed the platform.
- See more at: http://www.woodworkingnetwork.com/contest?page=2&pageSize=6&contestID=17&categoryID=1523&entryNum=&sec=viewAll#sthash.27qeZs2G.dpuf

Winners will be announced April 9 during a gala awards reception at the 2014 Cabinets & Closets Conference & Expo at the Hotel Somerset-Bridgewater. Visit cabinetsandclosetsexpo to register for the event. Voting for the People's Choice award is still open. Visit the Top Shelf Design Awards gallery to pick your favorite project.

Winners will be announced April 9 during a gala awards reception at the Cabinets & Closets Expo. Voting for the People's Choice award is still open. Visit the Top Shelf Design Awards gallery to pick your favorite project. - See more at: http://www.woodworkingnetwork.com/wood-market-trends/woodworking-industry-news/closets-industry-news/2014-Top-Shelf-Design-Awards-Finalists-Announced-250356861.html#sthash.RS3zyLch.dpuf
Winners will be announced April 9 during a gala awards reception at the Cabinets & Closets Expo. Voting for the People's Choice award is still open. Visit the Top Shelf Design Awards gallery to pick your favorite project. - See more at: http://www.woodworkingnetwork.com/wood-market-trends/woodworking-industry-news/closets-industry-news/2014-Top-Shelf-Design-Awards-Finalists-Announced-250356861.html#sthash.RS3zyLch.dpuf

Project Description: Take one very interesting, part-octagonal shaped room with eleven walls... include one pair of 90 degree walls and one set of French doors and proceed... The challenge: Create functional space for Dad's home office Mom's wrapping paper and gift supplies Two children's homework and crafting stations. Note: These spaces must grow along with the children as they grow from kindergarteners to teens. The focus as you enter remains on the octagonal shape and the three windows in front of you. Dad's space is kept neat. Pull-out shelves for the large office equipment (printer and scanner) keep those items handy but easily pushed out of the way when not in use. The abundance of drawers keeps Dad's work files organized and secure. The smaller drawers house all of the little things that make a home office run smoothly. Each child has an identical space on either side of the doors as you enter. Both boys have file drawers for their school papers and shallower drawers for art supplies and paper. The vertical cubbies help them learn about organization and will provide great function as they get older. They each also have one tall upper cabinet with a door to hide some of the unsightly necessities and open shelving to show off art and awards. The location on either side of the doorway provide each their own special space with the added bonus that the mess that is sometimes created is not visible as you walk by the entrance/doorway. Let's not forget Mom... she has abundant space on either side of Dad's area with upper cabinets that reach high towards the 120" ceiling. One side is for gifts: bags, wrapping and all the accoutrements. The other side is for all the other items a busy working mom needs to store within easy access. Additional lower drawers and closed shelf storage help keep this busy working mom organized. By wrapping the countertop in a continuous loop all the way around we were able to emphasize the unique shape of the room and provide plenty of work space for everyone. The Espresso Melamine choice along with the Stainless Steel hardware mimic the style of the home and closely match the color of the flooring. The white marble countertop "pops" and sets off the crown molding, window trim and door frames. The prospect was daunting but check, check, check we accomplished all of the goals, providing an inviting space for the family to work together. The boys love being able to share the space with their busy dad and Dad loves the extra time he gets to spend alongside his sons. MISSION ACCOMPLISHED!

List materials used in the project, including wood, veneer, laminate, hinges, decorative accessories, etc.: Espresso Woodgrain Melamine Stainless Steel Handles

Describe any design challenges, i.e. obstructions, etc.: The shape of the room was a challenge because I wanted to keep the unique look while maximizing the function. Providing all the client requests while keeping it attractive was necessary because the room is directly off the main area of the first floor. Only two 90 degree angles in the room. Window sills were lower than countertop height so design had to accommodate that challenge.

Was the design created by hand or software program? If software program, which one did you use?: Both hand drawings and software were used. I always begin with detailed hand drawings which are ultimately submitted for cutlist and installation purposes. CAD is utilized for client visualization purposes.

Describe the installation process and any challenges.: This installation had to be done in steps. First day was the lower units. Day two was for the countertop which was obviously a long process. Day three was for the upper units and the moldings.


Prev 1 2 Next All

 

About the Author

Michaelle Bradford

Michaelle Bradford is Managing Editor of Closets magazine, Custom Woodworking Business magazine, Wood Products magazine and Custom Built Interiors Weekly eNewsletter. She can be reached at mbradford@woodworkingnetwork.com or Google+.

Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

 

View all events >
JUL
28

Summer 2014 Las Vegas Market

Las Vegas , NV
JUL
29

Formobile 2014

Sao Paolo
Search our database for woodworking equipment, supplies and services:

Select a category:


Feedback Form
Feedback Form