A Merger of Furniture and Cabinetry
California-based McKenzie Cabinetry merges furniture and cabinetry styles to create a new look.
By Karen M. Koenig
“We love doing furniture, but cabinetry pays the bills. So we try to bring the idea of furniture across in all our cabinetry,” says owner McKenzie.
McKenzie is in charge of all the design work, and is often called upon to provide hand- rendered shop drawings. He will also weigh in with suggestions for species, finishes and accessories.
“It’s the details that make the difference,” McKenzie says regarding his company’s products. “For example, we use dovetail drawer boxes in all our designs. We’ll go the extra effort to match the panels; and instead of 1/4-inch panels, we’ll use 1/2-inch panels, which means our doors are heavier, but more durable. We also back cut the doors for detail.”
In addition, the company uses strictly biscuit joinery, and it glues, not nails or staples, components together. “Our cabinet doors are solid. All our door fronts are edged with solid wood and splined. This means the edges will never ‘peel’ off,” McKenzie adds.
Other Manufacturing Techniques
“Bamboo can be difficult to work with, though. It’s an extremely hard wood and takes a longer time to sand. We used it laid up in 3/4-inch by 1/4-inch strips, and edged with 1-1/2-inch strips of banding.” The company outsources all its spray finishing, including the clear conversion varnish which was used on the bamboo finish. “We will, however, do all the hand-rubbed, oil finishes in-house. Those take a lot longer because we will only do one coat a day,” McKenzie says. “We won’t compromise on the product’s quality by rushing a job.”
“People have told us we could cut corners because a kitchen may not be the type of job that warrants the extra touches,” McKenzie adds. “But we’ve said no. Because of that, we don’t get callbacks on products because they don’t fail. We care, because this is our livelihood.”
Attention to detail and quality control are apparent in all of McKenzie Cabinetry’s work. Typically, the two-man shop will have anywhere from one large to two to three smaller projects in process simultaneously. The turnaround time varies, depending on the complexity of the job. Typically, a “standard” kitchen will take two weeks to complete, McKenzie says. And although the company uses automated equipment, each piece receives a personal touch.
One such project is the stand for a sink basin, measuring 34 inches tall by 8-1/2 inches across the top. Gibson crafted the stand using 33 pieces of cherry which he shaped, angled, fluted and matched. “Before it’s done, it will be smoothed, scored and finished,” Gibson says. That single project involved more than 80 hours of work.
The company uses a variety of tools to manufacture its cabinetry and furniture. Contained in the estimated 2,000-square-foot shop are: a Delta 10-inch Unisaw tilting arbor saw and a Delta 16-inch drill press, a Laguna Tools LT 20 bandsaw with 12-inch resaw capacity, Porter-Cable routers, a Jet joiner and a Hitachi chop saw. Bosch belt sanders are used to smooth out any rough surfaces.
New Marketing Efforts Underway
“We have samples of our work out on the floor, along with fliers about the company,” McKenzie explains. The company’s relationship with a bamboo source has also led to a joint marketing effort: included in the bamboo shipments is a flier about McKenzie Cabinetry and a picture of the work it has done using the wood species.
“No matter what the job is, we won’t compromise on the product. The quality of the product is what’s most important. This is our livelihood,” he adds.